Page 1 of 1
Wanted: 2.8 V6 flywheel or starter ring
Posted: Fri Apr 02, 2021 3:10 pm
by SuperSponge
As title says i need a flywheel or starter ring as mine is shot.
Adam
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Sun Apr 04, 2021 10:42 am
by stevemarl
Maybe try Martin, Caprigear? Tel: +44 (0)1507 343148 (workshop)) I`d imagine shipping will be biggest expense?
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Mon Apr 05, 2021 4:39 pm
by Peter-S
This is on the back of my spare engine. I take it to be from an auto but I assume the ring gear is the same - it looks it to me.
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Mon Apr 05, 2021 9:27 pm
by SuperSponge
stevemarl wrote: ↑Sun Apr 04, 2021 10:42 am
Maybe try Martin, Caprigear? Tel: +44 (0)1507 343148 (workshop)) I`d imagine shipping will be biggest expense?
I'll try him thank you.
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Mon Apr 05, 2021 9:28 pm
by SuperSponge
Peter-S wrote: ↑Mon Apr 05, 2021 4:39 pm
This is on the back of my spare engine. I take it to be from an auto but I assume the ring gear is the same - it looks it to me.
DSC_0473.JPG
It does look like it i know it has 138 teeth and flywheel location size is 10.5", is that ring welded to the flywheel? could just be the picture,
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Tue Apr 06, 2021 8:55 am
by D366Y
Peter-S wrote: ↑Mon Apr 05, 2021 4:39 pm
This is on the back of my spare engine. I take it to be from an auto but I assume the ring gear is the same - it looks it to me.
DSC_0473.JPG
If it's from an auto then I think it's more likely to be the flexplate that goes between that and the gearbox - I spent forever looking for one last year and they're like rocking horse
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Tue Apr 06, 2021 7:59 pm
by Peter-S
SuperSponge wrote: ↑Mon Apr 05, 2021 9:28 pm
Peter-S wrote: ↑Mon Apr 05, 2021 4:39 pm
This is on the back of my spare engine. I take it to be from an auto but I assume the ring gear is the same - it looks it to me.
DSC_0473.JPG
It does look like it i know it has 138 teeth and flywheel location size is 10.5", is that ring welded to the flywheel? could just be the picture,
The ring is welded to the plate and has 138 teeth
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Tue Apr 06, 2021 9:33 pm
by SuperSponge
D366Y wrote: ↑Tue Apr 06, 2021 8:55 am
Peter-S wrote: ↑Mon Apr 05, 2021 4:39 pm
This is on the back of my spare engine. I take it to be from an auto but I assume the ring gear is the same - it looks it to me.
DSC_0473.JPG
If it's from an auto then I think it's more likely to be the flexplate that goes between that and the gearbox - I spent forever looking for one last year and they're like rocking horse
They are mate i can't find one at all, i think i will need to see if any others fit like a 2.3 or something.
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Wed Apr 07, 2021 7:54 am
by D366Y
Pretty sure you're sat on a flexplate worth a pretty penny there Peter!
https://www.ebay.co.uk/itm/FORD-V6-2-8- ... 4421100143
I only paid £35 quid for mine last year
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Wed Apr 07, 2021 10:22 am
by Vermilion
I think Summit had starter rings for sale. You just need to know dimensions.
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Wed Apr 07, 2021 2:24 pm
by Peter-S
Blimey Dan, that's more than I paid for the engine! Might need to flog it then
Thanks for that.
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Wed Apr 07, 2021 2:43 pm
by D366Y
Peter-S wrote: ↑Wed Apr 07, 2021 2:24 pm
Blimey Dan, that's more than I paid for the engine! Might need to flog it then
Thanks for that.
They are crazy money because they are a bloody nightmare to get hold of. Mine had some slight wear on the edges so had to be changed and I shit thee not - three months it took me to find one. Tried every gearbox specialist, scrap yard and ditch I could find and just by chance I saw a guy selling an entire engine on ebay with one on the back of it so asked him to take it off and sell it to me which he duly did
Not sure how much there is for a demand for them - I would imagine not very often seeing as they are only for the C3 autos, not even sure if it is interchangeable with the pinto/v6 without checking the part numbers but would assume they are probably different based on the fact that the one I linked has a different part number compared to mine though could be because it is for the Cologne but may still fit both the essex and pinto? No idea.
Either way, I call first dibs - I'll even take my finders fee for a buyer (usually £149.99) off your asking price of £150
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Thu Apr 08, 2021 8:05 am
by Vermilion
Re: Wanted: 2.8 V6 flywheel or starter ring
Posted: Thu Apr 08, 2021 8:45 pm
by SuperSponge
It's a 138. I bet it would cost a fair bit on shipping to get a flywheel from america but i'll see if i can use the part number and se if there is one in UK, thank you.