Evening all!
I've gone and got myself one of those new fancy CCI parcel shelfs. I've one issue... I've never seen an original shelf in my life and have always had a nasty furry reproduction one (from the 90s?!) and because of this I've got no template to drill holes from.
Does anyone know the measurements for all the holes that need drilling?
Two for the strings, size and location?
And however many are required for the seal/reinforcement bar?
Thanks!
Nic
Parcel Shelf Hole Measurements
-
- Donator
- Posts: 2373
- Joined: Sat May 17, 2014 8:34 pm
- Car(s): 1980 mk3 capri 2l ohc T9 , Toyota Blade Master 3.5l V6, Paso , 850T,rd400, 900ss
- Location: Invercargill New Zealand
Re: Parcel Shelf Hole Measurements
Geeze man ,your title nearly give me heart failure, I thought you were going to ask where to cut the speaker holes . Aaaah ,wheres my betaloc .
Sometimes I talk to myself ... and we both have a good laugh
-
- Posts: 424
- Joined: Wed Jun 10, 2009 6:23 pm
- Car(s): 2015 Abarth 595 Competizione, 2004 Smart Roadster, 1983 Ford Capri LS 1600
- Location: Devon
Re: Parcel Shelf Hole Measurements
Thanks guys! Great help.
Haha nope, no speaker holes thank you... Just trying to get as close to original as possible with what's readily available.
Next I need to find the little plastic things that connect the cords to the shelf. Not even sure if you can still get them
Haha nope, no speaker holes thank you... Just trying to get as close to original as possible with what's readily available.
Next I need to find the little plastic things that connect the cords to the shelf. Not even sure if you can still get them
Re: Parcel Shelf Hole Measurements
TBH, a rubber grommet would do, as long as you put a steel washer on the underside to stop it pulling through. I`m sure there`s something here that could be adapted?
https://www.amazon.co.uk/s?k=plastic+gr ... ss-sm_2_16
https://www.amazon.co.uk/s?k=plastic+gr ... ss-sm_2_16