Steering column shroud

[ARCHP]

Morning, anyone tell me how to remove the small upper column shroud. Looking up I can see a small what looks plastic spigot, does it have nut on?

[Paul G]

If I remember rightly drop the lower shround then the upper one just pushes up and off.

[ARCHP]

There is definitely a spigot with a small sleeve round it stopping it from going up.

[Major_Tom]

I think the cone-shaped spigot pushes into a sleeve on the top of the steering column. Let me take a photographic image of mine and digitally upload it onto this page so you can see what we mean good sir.

[nemo]

If I remember rightly drop the lower shround then the upper one just pushes up and off.

Agree, the upper part has a pin underneath which presses into a plastic bushed hole in a bracket above the column. Just a push fit.

[ARCHP]

Decided to take indicator stalk off. This is what I found. The metal split ring stops the cover being able to move up.

. Not very clear photo.

[ARCHP]

With a good tap from inside they parted.

[Major_Tom]

I think the cone-shaped spigot pushes into a sleeve on the top of the steering column. Let me take a photographic image of mine and digitally upload it onto this page so you can see what we mean good sir.

Oh sorry - forgot all about it