Plastic coating
-
- Posts: 44
- Joined: Fri Jun 15, 2018 8:37 am
- Car(s): Capri 280
Plastic coating
Anybody seen or used this before? I always admire the brand new look on show cars that have had some sort of treatment on rubber pipes etc…tried a few things on the market but nothing really seems to give that ‘as new’ look
Re: Plastic coating
Not seen it before, sounds good but Amazon customer reviews are not great;
2.8 out of 5 stars
5 star 25%
4 star 12%
3 star 17%
2 star 5%
1 star 41%
I have Autoglym bumper and trim gel it's great, although not used it on any pipes or in engine bay, but might be as good?
2.8 out of 5 stars
5 star 25%
4 star 12%
3 star 17%
2 star 5%
1 star 41%
I have Autoglym bumper and trim gel it's great, although not used it on any pipes or in engine bay, but might be as good?
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Plastic coating
No never used that I have used Gtechniq C4 Permanent Trim Restorer what really does work on old faded plastic and you only use a small amount and then buffs up . But very expensive . My all purpose stuff is autoglym
Ford Capri 2.0 Laser 1987 Mercury Grey .......
- Peter-S
- Donator
- Posts: 7455
- Joined: Mon Jul 28, 2008 7:57 am
- Car(s): 1985 Capri 2.0
1983 Capri 2.8i - Location: Kent
- Contact:
Re: Plastic coating
'old faded plastic' - is that the mother-in law againJasonmarie wrote: ↑Mon Apr 24, 2023 4:15 pm I have used Gtechniq C4 Permanent Trim Restorer what really does work on old faded plastic
-
- Posts: 290
- Joined: Sun Apr 17, 2022 8:01 pm
- Car(s): Capri Ghia MK3 3.0, Jensen Interceptor MK3, ZTT 260 V8
Re: Plastic coating
Cerakote is the best product for tired looking trim, it will last a couple of years on external parts and twice that on internal trim.
Dont just wipe it on, clean the part first with the cleaner and you will be amazed at the result. I did the wife's Mini and it looked like I had fitted new plastic trim all around the car and still looks good over a year later.
Some external trim can be made to look a lot better with a heat gun but be very carefull, the heat brings the oil in the plastic to the surface but depending on how tired it is depends on how long it will last.
Dont just wipe it on, clean the part first with the cleaner and you will be amazed at the result. I did the wife's Mini and it looked like I had fitted new plastic trim all around the car and still looks good over a year later.
Some external trim can be made to look a lot better with a heat gun but be very carefull, the heat brings the oil in the plastic to the surface but depending on how tired it is depends on how long it will last.
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Plastic coating
I don’t think anything could restore her .Peter-S wrote: ↑Mon Apr 24, 2023 5:04 pm'old faded plastic' - is that the mother-in law againJasonmarie wrote: ↑Mon Apr 24, 2023 4:15 pm I have used Gtechniq C4 Permanent Trim Restorer what really does work on old faded plastic
Ford Capri 2.0 Laser 1987 Mercury Grey .......
Re: Plastic coating
Nice selection of cars you have, and as you own a ZT 260 (I was tempted to get one myself a few years ago), you might be interested in watching thisSCP440 wrote: ↑Mon Apr 24, 2023 5:41 pm Cerakote is the best product for tired looking trim, it will last a couple of years on external parts and twice that on internal trim.
Dont just wipe it on, clean the part first with the cleaner and you will be amazed at the result. I did the wife's Mini and it looked like I had fitted new plastic trim all around the car and still looks good over a year later.
Some external trim can be made to look a lot better with a heat gun but be very carefull, the heat brings the oil in the plastic to the surface but depending on how tired it is depends on how long it will last.
https://www.youtube.com/watch?v=8PNTxYagrUI
Andy is a good friend and helps me run our XR owners branch, and has plenty more Youtube material on Fords and Rovers
PS. Sorry to to the OP for hijacking the thread slightly
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Plastic coating
That’s funny as my wife is Cornish and her cousin was telling me about this guy on you tube who is in to his fords & Rovers . I see the other week he wants a Capri ? As he shows a picture that his grandad had and it’s a Mercury grey laser Capri like mine .andyd wrote: ↑Tue Apr 25, 2023 8:34 amNice selection of cars you have, and as you own a ZT 260 (I was tempted to get one myself a few years ago), you might be interested in watching thisSCP440 wrote: ↑Mon Apr 24, 2023 5:41 pm Cerakote is the best product for tired looking trim, it will last a couple of years on external parts and twice that on internal trim.
Dont just wipe it on, clean the part first with the cleaner and you will be amazed at the result. I did the wife's Mini and it looked like I had fitted new plastic trim all around the car and still looks good over a year later.
Some external trim can be made to look a lot better with a heat gun but be very carefull, the heat brings the oil in the plastic to the surface but depending on how tired it is depends on how long it will last.
https://www.youtube.com/watch?v=8PNTxYagrUI
Andy is a good friend and helps me run our XR owners branch, and has plenty more Youtube material on Fords and Rovers
PS. Sorry to to the OP for hijacking the thread slightly
Small world andy
Ford Capri 2.0 Laser 1987 Mercury Grey .......
-
- Posts: 290
- Joined: Sun Apr 17, 2022 8:01 pm
- Car(s): Capri Ghia MK3 3.0, Jensen Interceptor MK3, ZTT 260 V8
Re: Plastic coating
Yes a good video, there is also one of a chap in Germany pushing his 260 on some unrestricted streches of Autobahn.andyd wrote: ↑Tue Apr 25, 2023 8:34 am
Nice selection of cars you have, and as you own a ZT 260 (I was tempted to get one myself a few years ago), you might be interested in watching this
https://www.youtube.com/watch?v=8PNTxYagrUI
Andy is a good friend and helps me run our XR owners branch, and has plenty more Youtube material on Fords and Rovers
PS. Sorry to to the OP for hijacking the thread slightly
Thanks, I am lucky I have a Van for work so I can have nice cars, sadly the 260 gets used as my ''everyday '' car but in the 6 years I have owned it the only things it has needed is Tyres ( a lot), brakes and a couple of lower arms. Probably one of the best all rounder cars I have ever owned especially as its an Estate ( 1 of only 90 made). Its biggest shortfall is lack of range for big journeys as it only has a 13 gallon tank. It will do high 20's if kept legal but letting it strech its legs and you are looking for fuel after 140 miles as the low fuel warning will be on.
Re: Plastic coating
Hi JM,Jasonmarie wrote: ↑Tue Apr 25, 2023 4:04 pm
That’s funny as my wife is Cornish and her cousin was telling me about this guy on you tube who is in to his fords & Rovers . I see the other week he wants a Capri ? As he shows a picture that his grandad had and it’s a Mercury grey laser Capri like mine .
Small world andy
I think I've watched all his videos so far, and yes he does want another Capri eventually (He should have started looking 10 years ago when they were affordable )
it is a small world
As you say a good all round car. Andy told me some parts are very hard to find so that put me off at the time.SCP440 wrote: ↑Tue Apr 25, 2023 7:12 pm
Yes a good video, there is also one of a chap in Germany pushing his 260 on some unrestricted streches of Autobahn.
Thanks, I am lucky I have a Van for work so I can have nice cars, sadly the 260 gets used as my ''everyday '' car but in the 6 years I have owned it the only things it has needed is Tyres ( a lot), brakes and a couple of lower arms. Probably one of the best all rounder cars I have ever owned especially as its an Estate ( 1 of only 90 made). Its biggest shortfall is lack of range for big journeys as it only has a 13 gallon tank. It will do high 20's if kept legal but letting it strech its legs and you are looking for fuel after 140 miles as the low fuel warning will be on.
As with the Mustang I had instead, they can be half sensible economy wise if driven sensibly but that sometimes defeats the object of having a V8
-
- Posts: 290
- Joined: Sun Apr 17, 2022 8:01 pm
- Car(s): Capri Ghia MK3 3.0, Jensen Interceptor MK3, ZTT 260 V8
Re: Plastic coating
The parts situation has improved and to be honest some Capri parts are more difficult to find.