Hi all,
Can anyone tell me which fuel pipes go to which metering head port.
1.The one on the side nearest the radiator on the side
2. The one on top in the middle
3.The three on the side nearest the passenger wing side.
I took them off and didn't take photos (silly me)
Thanks Kelvin
Capri 2.8i metering head
-
- Posts: 23
- Joined: Sun Jul 17, 2022 1:18 pm
- Car(s): Capri 2.8i restoration project
- Andrew 2.8i
- Donator
- Posts: 14775
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Capri 2.8i metering head
Hi Kelvin,Kelvin Pugh wrote: ↑Thu Aug 04, 2022 6:20 pm Hi all,
Can anyone tell me which fuel pipes go to which metering head port.
1.The one on the side nearest the radiator on the side
2. The one on top in the middle
3.The three on the side nearest the passenger wing side.
I took them off and didn't take photos (silly me)
Thanks Kelvin
They are as follows:
1. Warm up regulator (larger banjo).
2. Cold start.
3. From the front to rear:
Warm up regulator (smaller banjo).
Fuel tank return
Fuel feed (from fuel accumulator). There is an arrow stamped on the metering head to indicate the direction of fuel flow.
Andrew.
- Peter-S
- Donator
- Posts: 7455
- Joined: Mon Jul 28, 2008 7:57 am
- Car(s): 1985 Capri 2.0
1983 Capri 2.8i - Location: Kent
- Contact:
Re: Capri 2.8i metering head
Are 1 & 2 the other way around Andrew?Andrew 2.8i wrote: ↑Thu Aug 04, 2022 6:59 pmHi Kelvin,Kelvin Pugh wrote: ↑Thu Aug 04, 2022 6:20 pm Hi all,
Can anyone tell me which fuel pipes go to which metering head port.
1.The one on the side nearest the radiator on the side
2. The one on top in the middle
3.The three on the side nearest the passenger wing side.
I took them off and didn't take photos (silly me)
Thanks Kelvin
They are as follows:
1. Warm up regulator (larger banjo).
2. Cold start.
3. From the front to rear:
Warm up regulator (smaller banjo).
Fuel tank return
Fuel feed (from fuel accumulator). There is an arrow stamped on the metering head to indicate the direction of fuel flow.
Andrew.
- Andrew 2.8i
- Donator
- Posts: 14775
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
-
- Posts: 23
- Joined: Sun Jul 17, 2022 1:18 pm
- Car(s): Capri 2.8i restoration project
Re: Capri 2.8i metering head
Thanks Guys