The Ford Capri Laser Page

Just about to have the tailgate painted on my 280, I need to scource a nice new Ford badge as well as a new tailgate decal, any recommendations…many thanks

Essexsoulboy wrote: ↑Wed May 18, 2022 8:38 pm any recommendations…many thanks

DMB Graphics make good quality products.
https://www.dmb.uk.com/prod/capri-280-tailgate-decal

Andrew.

Many thanks they look spot on...found these on ebay I presume they are the correct size

https://www.ebay.co.uk/itm/334197558011 ... BMjq2ur5tg

Thanks again

Decals do seem to differ, depending (I assume) on who manufacturers them and/or when. For example I have a spare Laser decal which differs slightly from the ones on the car. So if that's important to you I'd definitely make sure that the one to be supplied matches any existing ones which you have on the car.

Hi, anyone, know of anyone making good Capri GT4 decals ???? Thanks

BertCapri wrote: ↑Thu Jun 09, 2022 8:11 pm Hi, anyone, know of anyone making good Capri GT4 decals ???? Thanks

I'm after some of those too, can't find any. I asked a couple of companies and we basically have track down the dimensions of the stickers and pass them on.

Major_Tom wrote: ↑Thu Jun 09, 2022 8:21 pm

BertCapri wrote: ↑Thu Jun 09, 2022 8:11 pm Hi, anyone, know of anyone making good Capri GT4 decals ???? Thanks

I'm after some of those too, can't find any. I asked a couple of companies and we basically have track down the dimensions of the stickers and pass them on.

Nice, anyone on here got a GT4 or know anyone with one
thanks Tom

BertCapri wrote: ↑Thu Jun 09, 2022 8:29 pm Nice, anyone on here got a GT4 or know anyone with one

Are you talking about the bonnet and side stripes? It would be a heck of a job measuring all of those!

If you mean the bootlid decal, would it be the same "Capri 1.6" or "Capri 2.0" as on other models?

Andrew.

Andrew 2.8i wrote: ↑Fri Jun 10, 2022 5:40 am

BertCapri wrote: ↑Thu Jun 09, 2022 8:29 pm Nice, anyone on here got a GT4 or know anyone with one

Are you talking about the bonnet and side stripes? It would be a heck of a job measuring all of those!

If you mean the bootlid decal, would it be the same "Capri 1.6" or "Capri 2.0" as on other models?

Andrew.

No Andrew looking to get full Gt4 decal kit, been looking around on and off for while but no one on earth seems to produce them
thanks

It wouldn’t be cheap but you should be able to have one made at a sign makers. They should be able to cut anything out of vinyl but you will pay for the privilege, that’s if you can find stripe width. Or you can take educated guesses from photos, mock up a range of stripes in paper and see which size you prefer. Might not be “OE” but they are so rare, who’d know!?

Yeah, we need to find someone with a GT4 and take it from there.

The GT4 stripes are a multitude of different thicknesses and spacings I seem to remember.

Dave at DMB Graphics was looking into making a kit and measure up the capri front end. Not sure if Dave got round to it.

Hi,
here in Czech Republic somebody probably offers GT4 stripe kit. On one picture there is Capri GT4.
But according to GMB Graphics prices, it will be quite expensive. Capri S stripe kit: 2400 CZK = 90 GBP (DMB Graphics: 48 GBP)
https://auto.bazos.cz/inzerat/166145260 ... napisy.php

If anybody is interested, I'll ask him about GT4 stripe kit and delivery to GB.


Tom