Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Capri Parts For Sale and Wanted
Post Reply
Lewis22
Posts: 6
Joined: Fri Jan 01, 2021 7:21 pm
Car(s): Ford Capri

Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Post by Lewis22 »

Hi All,

I'm looking for a completely standard full or part exhaust system for a MK3 2.8 and/or 3.0. Ideally I'd like a full system in good condition but I'd also be interested in just the back box-tail pipe section if standard.

Please let me know!

Many Thanks
andyd
Posts: 7813
Joined: Wed Aug 20, 2014 10:43 am
Car(s): 1984 Ford Sierra 1.6GL
Location: Devon

Re: Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Post by andyd »

Mostly performance systems now, but Tickover have the rear boxes;
https://www.tickover.co.uk/shop/content ... /p235.html
https://www.tickover.co.uk/shop/content ... /p236.html

Centre sections currently out of stock, but here is their full range;
https://www.tickover.co.uk/shop/contents/en-uk/d83.html

:goodluck:
User avatar
T.M.
Posts: 220
Joined: Mon Aug 14, 2017 9:26 pm
Car(s): Capri 2.8 Injection (1984)
Location: Czech Rep.

Re: Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Post by T.M. »

Hi,
here they have complete exhaust for 2.8i, but it is from Germany.
For 3.0 they have different lenght of centre sections (don't know if it is right), but it is out of stock.

https://www.motomobil.com/en/products?k ... seite_id=2
https://www.motomobil.com/en/products?k ... eite_id=12
https://www.motomobil.com/en/products?k ... eite_id=13
https://www.motomobil.com/en/products?k ... seite_id=3


Tom
Lewis22
Posts: 6
Joined: Fri Jan 01, 2021 7:21 pm
Car(s): Ford Capri

Re: Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Post by Lewis22 »

Cheers for the replies guys, I'll certainly check those useful links out! I'd be interested in used standard systems if anyone has them? Once again, thanks for the replies! :D
andyd
Posts: 7813
Joined: Wed Aug 20, 2014 10:43 am
Car(s): 1984 Ford Sierra 1.6GL
Location: Devon

Re: Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Post by andyd »

Lewis22 wrote: Sun Feb 20, 2022 10:44 pm Cheers for the replies guys, I'll certainly check those useful links out! I'd be interested in used standard systems if anyone has them? Once again, thanks for the replies! :D
Try DrB http://brooklands280.com/contact-us.php

I know he sold alot of stuff a while back but he did have a very good standard system that came off the 2.8 I bought from him.
Not_Anumber
Donator
Donator
Posts: 893
Joined: Sun Jan 15, 2017 3:54 pm
Car(s): Just sold 1983 2.8 Injection 5 speed. Currently restoring another classic Previously owned 2 Capris. Likely to own another at some point

Re: Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Post by Not_Anumber »

I have a complete standard good second hand system for a 2.8 including a pair of standard exhaust manifolds and U clamps. I bought this a few years ago with the intention of swapping it over for the Sportex system that the PO fitted which at the time was driving me mad, knocking against just about everything possible each time the car went over a slight bump.

Having since taken advice and adjusted the Sportex system it now fits properly with no fouling hence Ive not needed to revert to a standard system and Im not sure I'l ever get around to it. So I could probably be persuaded to sell it and free up some shed space. Where abouts are you ?
Not_Anumber
Donator
Donator
Posts: 893
Joined: Sun Jan 15, 2017 3:54 pm
Car(s): Just sold 1983 2.8 Injection 5 speed. Currently restoring another classic Previously owned 2 Capris. Likely to own another at some point

Re: Wanted: Standard MK3 2.8 And/Or 3.0 Exhaust System

Post by Not_Anumber »

Lewis if you send me your email address i can get the photos over to you
Post Reply