Hi
Heater control not working, found that where the cable attaches to the flap on the heater box, the plastic lug has broken off the flap so looking for a replacement heater box, will also change the matrix while doing the swap.
Mark
heater box wanted
Re: heater box wanted
I have some stripped down heater units, is it just a casing you need?
-
- Donator
- Posts: 556
- Joined: Mon Feb 17, 2014 9:57 pm
- Car(s): 2.0 Laser and XR4x4i.
- Location: Hampshire
Re: heater box wanted
Hi Martin, I need the cables and where they attach to the heater box but happy to buy the whole asembly with cables if you have one. One of the cable ends on mine has broken along with the plastic spigot on the heater flap that the cable attaches to.
-
- Donator
- Posts: 556
- Joined: Mon Feb 17, 2014 9:57 pm
- Car(s): 2.0 Laser and XR4x4i.
- Location: Hampshire
Re: heater box wanted
Got a heater box casing with cables attached from capri gear, thanks Martin for sorting this out, can now get on with lying under the dash for a few hours.