Cologne camshaft comparison side by side - anyone know?
Cologne camshaft comparison side by side - anyone know?
Hi everyone - wanted to get some opinions on a camshaft upgrade i've bought and about to install
I am enjoying learning as much as i can about the cologne engine (and engines in general to be honest) but i have a question I'm hoping you can help with.
So the new camshaft i've bought is supposed to be a 'fast road' profile but when i compare it to my existing cam (on the right of the picture), my existing one looks 'flatter' giving a longer duration - ?
By contrast the new camshaft (the one on the left of the pic ) looks 'sharper' and therefore looks like it will have the valves open shorter than the one.
from the language I am using to describe the different camshafts you'll know i'm a novice when it comes to this stuff - but hopefully you see what I mean - ? I don't understand how the new camshaft will open the valves for longer based on the shape i am seeing. But is there something in the angle of the cam that i don't know about I wonder? The camshaft was made from a blank and the same place i got them did an absolutely lovely job porting my cylinder heads.
Grateful for any advice you might have for me - thanks all !
I am enjoying learning as much as i can about the cologne engine (and engines in general to be honest) but i have a question I'm hoping you can help with.
So the new camshaft i've bought is supposed to be a 'fast road' profile but when i compare it to my existing cam (on the right of the picture), my existing one looks 'flatter' giving a longer duration - ?
By contrast the new camshaft (the one on the left of the pic ) looks 'sharper' and therefore looks like it will have the valves open shorter than the one.
from the language I am using to describe the different camshafts you'll know i'm a novice when it comes to this stuff - but hopefully you see what I mean - ? I don't understand how the new camshaft will open the valves for longer based on the shape i am seeing. But is there something in the angle of the cam that i don't know about I wonder? The camshaft was made from a blank and the same place i got them did an absolutely lovely job porting my cylinder heads.
Grateful for any advice you might have for me - thanks all !
Re: Cologne camshaft comparison side by side - anyone know?
It's the angle of the lobes that keeps the valves open longer, or duration I have also heard it called. Edd explians https://www.youtube.com/watch?v=OfdgxPpXD9U
What make cam is that? Always wondered what a uprated cam would be like in a 2.8, let us know when fitted
Had a fast road cam in my XR3i, that went well but the tickover was set at 1100 rpm.
What make cam is that? Always wondered what a uprated cam would be like in a 2.8, let us know when fitted
Had a fast road cam in my XR3i, that went well but the tickover was set at 1100 rpm.
Re: Cologne camshaft comparison side by side - anyone know?
Looks are very deceiving with cam profiles. Here's a explanation to do with base circles.https://www.ozvr4.com/threads/camshaft- ... ion.16111/
-
- Donator
- Posts: 1893
- Joined: Tue Jul 29, 2008 5:23 pm
- Car(s): Diamond White Granada 24v
Caspian Blue Sierra XR4i
Stealth Grey Focus RS
Storm Grey Fiesta ST200 (actually belongs to the missus!)
Mean Green Fiesta ST-3
Re: Cologne camshaft comparison side by side - anyone know?
Your new one looks like a high(er) lift profile. You’ll probably loose some torque but gain bhp at high revs.
Re: Cologne camshaft comparison side by side - anyone know?
Used to get my car serviced by a guy who raced a 3.0S.
His daily hack was a 2.8i with what was known as an 'ambulance cam'. So called because it was developed to put in Transit-based ambulances to improve their performance. It gave virtually the same BHP, but the torque was amazing.
On standard British roads it would leave the 3.0 race car for dead.
So, before you bolt it all together; what are you wanting to achieve?
Track day car? Go ahead with the one you have.
Likewise if you want the bragging rights in the bar. 'Fast Road' tends to be the selling gimmick more than an accurate description of it's achievements in daily life.
But if you want a car that is more fun to drive on the road, and quicker from point to point on anything less than a drag strip, you may want to think about swapping it for a high torque one.
Just my opinion of course.
His daily hack was a 2.8i with what was known as an 'ambulance cam'. So called because it was developed to put in Transit-based ambulances to improve their performance. It gave virtually the same BHP, but the torque was amazing.
On standard British roads it would leave the 3.0 race car for dead.
So, before you bolt it all together; what are you wanting to achieve?
Track day car? Go ahead with the one you have.
Likewise if you want the bragging rights in the bar. 'Fast Road' tends to be the selling gimmick more than an accurate description of it's achievements in daily life.
But if you want a car that is more fun to drive on the road, and quicker from point to point on anything less than a drag strip, you may want to think about swapping it for a high torque one.
Just my opinion of course.
Re: Cologne camshaft comparison side by side - anyone know?
Very interesting my man.Bug wrote: ↑Mon Jul 06, 2020 8:45 am
His daily hack was a 2.8i with what was known as an 'ambulance cam'. So called because it was developed to put in Transit-based ambulances to improve their performance. It gave virtually the same BHP, but the torque was amazing.
On standard British roads it would leave the 3.0 race car for dead.
I'm the one who leaves all those shoes in the carriageway.
Re: Cologne camshaft comparison side by side - anyone know?
Yeah, can't remember his surname. Olly, from AES Engines at East Dereham.Major_Tom wrote: ↑Mon Jul 06, 2020 10:38 amVery interesting my man.Bug wrote: ↑Mon Jul 06, 2020 8:45 am
His daily hack was a 2.8i with what was known as an 'ambulance cam'. So called because it was developed to put in Transit-based ambulances to improve their performance. It gave virtually the same BHP, but the torque was amazing.
On standard British roads it would leave the 3.0 race car for dead.
Of course I'm talking 25-30 years ago now.
(Oh and Tom, as an aside, as of next Monday it will be 9 years since I last saw you! Time flies)
Re: Cologne camshaft comparison side by side - anyone know?
That'll be Olly Sparks. He posts on here sonetimes. A gambler, rake and invert, so they say.Bug wrote: ↑Mon Jul 06, 2020 12:02 pmYeah, can't remember his surname. Olly, from AES Engines at East Dereham.Major_Tom wrote: ↑Mon Jul 06, 2020 10:38 amVery interesting my man.Bug wrote: ↑Mon Jul 06, 2020 8:45 am
His daily hack was a 2.8i with what was known as an 'ambulance cam'. So called because it was developed to put in Transit-based ambulances to improve their performance. It gave virtually the same BHP, but the torque was amazing.
On standard British roads it would leave the 3.0 race car for dead.
Of course I'm talking 25-30 years ago now.
(Oh and Tom, as an aside, as of next Monday it will be 9 years since I last saw you! Time flies)
Golly time does indeed fly, are you still in the village near Thetford?
I'm the one who leaves all those shoes in the carriageway.
Re: Cologne camshaft comparison side by side - anyone know?
Nope. Now in a bungalow in Attleborough. Married 5 years in May.
Youngest lad, Ben, is now an airframes/engines techy in the RAF, at Coningsby on 29 Sqn. Got himself fully qualified to run Typhoon engines. Got his Op Shader medal for serving in the Syrian malarkey. Got his own house in Sleaford too. He was 12 when you last saw him!
Re: Cologne camshaft comparison side by side - anyone know?
Bloody ell... crazy!
I'm the one who leaves all those shoes in the carriageway.
Re: Cologne camshaft comparison side by side - anyone know?
Guys - i am very happy I've managed to faciliate a reunion between Bug and Major Tom - I feel a bit like Cilla Black here
I love the links above - particularly the one from Stroker - talk about looks being deceiving. Sometimes what seems like 'common sense' is anything but! Really helpful to understand the dark arts of camshafts.
To answer Andy's Q - its from CNCHeads up in Manchester - owned/run by Ric Wood. I actually had an email convo with him today in which he basically confirmed the info in Stroker's link (i mean he explained it to me but it was only after i saw the picture in the link that my brain actually 'got it' - i'm a simple man who needs pictures!) - Ric's been brilliant actually- plus the work on the heads done very nicely and in double quick time (around a week - all the other recommended places were quoting around a month to do it.)
re: Bug's Qs - basically what i wanted was a bit more 'oomph' (technical term) by which i guess i mean power (nothing crazy - but i was getting the heads ported/flowed anyway by Ric so I asked him what camshaft would be a nice partner to the new head) - but i take your very good point on torque being the main thing to how fast a car 'feels'.) I don't do track days - just out on the weekends on my own when i can get away from the family for a few precious hours driving 'friskily' shall we say... !
Ric's cams are his unique design made from blanks - and what they do is give more power with no noticeable loss in torque according to him - when i was doing the rounds from cam suppliers I specifically asked about this point as i was aware of it and the legendary 'ambulance cams' too (i think the first time i heard about them was on this very forum).
I mean - who know if i'll find it 'noticeable' - but I'm prepared to take Ric's word on this given his reputation and the level of quality work he did to my heads. Also - i have always thought that i could live with slight loss in torque because I'm happy to drop a gear to keep it in the power band...?!
Who knows eh?! I just hope that I notice something (anything) faster/better about the engine after the work that's going into all of this. I got the block and all the bits properly cleaned as well (oil mud everywhere) and someone said that just having the engine properly cleaned and 'half rebuilt' would give me a performance increase alone, apart from the new heads and cams - fingers crossed! Once we get the engine back in and I've run her in a bit I'll report back with my findings !
All of this started with me seriosly looking at boring/stroking but apparently the siamese exhaust is the ultimate limiter of all this - it's a very hard squeeze on the lemon for not much juice - and I love my engine too much to replace it with anything else (maybe that will be my next project tho with a 2.0 doner chassis - there was a 2.9 cossie engine floating around on ebay a while back which was very tempting...) - after all my research I found that the one reliable way to get the biggest bang for your Cologne buck (according to Tickover who know their onions) was to get it stroked to 3.5ltrs (YES you read that right) by the guys in Car Clinic up north. I actually had a few long convos with them and they were very knowledgeable and helpful. But then again there are cheaper ways of getting a capri up to 200+BHP if thats what you really want (buy a pinto and tune it!), and like i said i love my cologne too much to have it drastically altered/replaced.
I love the links above - particularly the one from Stroker - talk about looks being deceiving. Sometimes what seems like 'common sense' is anything but! Really helpful to understand the dark arts of camshafts.
To answer Andy's Q - its from CNCHeads up in Manchester - owned/run by Ric Wood. I actually had an email convo with him today in which he basically confirmed the info in Stroker's link (i mean he explained it to me but it was only after i saw the picture in the link that my brain actually 'got it' - i'm a simple man who needs pictures!) - Ric's been brilliant actually- plus the work on the heads done very nicely and in double quick time (around a week - all the other recommended places were quoting around a month to do it.)
re: Bug's Qs - basically what i wanted was a bit more 'oomph' (technical term) by which i guess i mean power (nothing crazy - but i was getting the heads ported/flowed anyway by Ric so I asked him what camshaft would be a nice partner to the new head) - but i take your very good point on torque being the main thing to how fast a car 'feels'.) I don't do track days - just out on the weekends on my own when i can get away from the family for a few precious hours driving 'friskily' shall we say... !
Ric's cams are his unique design made from blanks - and what they do is give more power with no noticeable loss in torque according to him - when i was doing the rounds from cam suppliers I specifically asked about this point as i was aware of it and the legendary 'ambulance cams' too (i think the first time i heard about them was on this very forum).
I mean - who know if i'll find it 'noticeable' - but I'm prepared to take Ric's word on this given his reputation and the level of quality work he did to my heads. Also - i have always thought that i could live with slight loss in torque because I'm happy to drop a gear to keep it in the power band...?!
Who knows eh?! I just hope that I notice something (anything) faster/better about the engine after the work that's going into all of this. I got the block and all the bits properly cleaned as well (oil mud everywhere) and someone said that just having the engine properly cleaned and 'half rebuilt' would give me a performance increase alone, apart from the new heads and cams - fingers crossed! Once we get the engine back in and I've run her in a bit I'll report back with my findings !
All of this started with me seriosly looking at boring/stroking but apparently the siamese exhaust is the ultimate limiter of all this - it's a very hard squeeze on the lemon for not much juice - and I love my engine too much to replace it with anything else (maybe that will be my next project tho with a 2.0 doner chassis - there was a 2.9 cossie engine floating around on ebay a while back which was very tempting...) - after all my research I found that the one reliable way to get the biggest bang for your Cologne buck (according to Tickover who know their onions) was to get it stroked to 3.5ltrs (YES you read that right) by the guys in Car Clinic up north. I actually had a few long convos with them and they were very knowledgeable and helpful. But then again there are cheaper ways of getting a capri up to 200+BHP if thats what you really want (buy a pinto and tune it!), and like i said i love my cologne too much to have it drastically altered/replaced.
Re: Cologne camshaft comparison side by side - anyone know?
Well I'm glad you've taken all the input in good faith, and answered it slightly more comprehensively than anyone would imagine you would.
An apology for hijacking the thread. A bit selfish, but the last time I saw Tom was at my wife's funeral. He was a ray of sunshine in a dismal day, as over a hundred people asked me who the gate-crashing goth-looking bloke was. But given his height and somewhat sinister look, he was left to plunder the buffet unhindered.
An apology for hijacking the thread. A bit selfish, but the last time I saw Tom was at my wife's funeral. He was a ray of sunshine in a dismal day, as over a hundred people asked me who the gate-crashing goth-looking bloke was. But given his height and somewhat sinister look, he was left to plunder the buffet unhindered.
Re: Cologne camshaft comparison side by side - anyone know?
thanks for the compliment my friend. Consider dropping in for CRaP for a while perhaps? Otherwise I will be forced to come to you for plundering of your tea as it would be good to see you.Bug wrote: ↑Mon Jul 06, 2020 4:52 pm Well I'm glad you've taken all the input in good faith, and answered it slightly more comprehensively than anyone would imagine you would.
An apology for hijacking the thread. A bit selfish, but the last time I saw Tom was at my wife's funeral. He was a ray of sunshine in a dismal day, as over a hundred people asked me who the gate-crashing goth-looking bloke was. But given his height and somewhat sinister look, he was left to plunder the buffet unhindered.
I'm the one who leaves all those shoes in the carriageway.
Re: Cologne camshaft comparison side by side - anyone know?
Not at all Bug! That’s what the forums for isn’t it? To find new friends and stay in touch (and wang on about our beloved capris all day of course) - and I’m sorry for your loss - I’ve also found that having great friends around for those dark days is a life saver.
Re: Cologne camshaft comparison side by side - anyone know?
Oliver Wilson is the bloke you mean, raced a 3.0 Capri and his dad Dave raced the 2.8i Capri.Major_Tom wrote: ↑Mon Jul 06, 2020 12:44 pmThat'll be Olly Sparks. He posts on here sonetimes. A gambler, rake and invert, so they say.
Golly time does indeed fly, are you still in the village near Thetford?
-
- Donator
- Posts: 2373
- Joined: Sat May 17, 2014 8:34 pm
- Car(s): 1980 mk3 capri 2l ohc T9 , Toyota Blade Master 3.5l V6, Paso , 850T,rd400, 900ss
- Location: Invercargill New Zealand
Re: Cologne camshaft comparison side by side - anyone know?
Made for a capri
Sometimes I talk to myself ... and we both have a good laugh
Re: Cologne camshaft comparison side by side - anyone know?
Yep seems like a top bloke and very helpful / generous with his time to explain things. Would love to look around that garage one day if I ever go up north that way. The proof will be in the pudding - Can’t wait to get my foot back on the pedal (after the 1000 mile Run-in!)
Re: Cologne camshaft comparison side by side - anyone know?
Did you get any figures or info on what your heads flow? Just interested to see how they flow.PaulCalf wrote: ↑Mon Jul 06, 2020 3:52 pm Guys - i am very happy I've managed to faciliate a reunion between Bug and Major Tom - I feel a bit like Cilla Black here
I love the links above - particularly the one from Stroker - talk about looks being deceiving. Sometimes what seems like 'common sense' is anything but! Really helpful to understand the dark arts of camshafts.
To answer Andy's Q - its from CNCHeads up in Manchester - owned/run by Ric Wood. I actually had an email convo with him today in which he basically confirmed the info in Stroker's link (i mean he explained it to me but it was only after i saw the picture in the link that my brain actually 'got it' - i'm a simple man who needs pictures!) - Ric's been brilliant actually- plus the work on the heads done very nicely and in double quick time (around a week - all the other recommended places were quoting around a month to do it.)
re: Bug's Qs - basically what i wanted was a bit more 'oomph' (technical term) by which i guess i mean power (nothing crazy - but i was getting the heads ported/flowed anyway by Ric so I asked him what camshaft would be a nice partner to the new head) - but i take your very good point on torque being the main thing to how fast a car 'feels'.) I don't do track days - just out on the weekends on my own when i can get away from the family for a few precious hours driving 'friskily' shall we say... !
Ric's cams are his unique design made from blanks - and what they do is give more power with no noticeable loss in torque according to him - when i was doing the rounds from cam suppliers I specifically asked about this point as i was aware of it and the legendary 'ambulance cams' too (i think the first time i heard about them was on this very forum).
I mean - who know if i'll find it 'noticeable' - but I'm prepared to take Ric's word on this given his reputation and the level of quality work he did to my heads. Also - i have always thought that i could live with slight loss in torque because I'm happy to drop a gear to keep it in the power band...?!
Who knows eh?! I just hope that I notice something (anything) faster/better about the engine after the work that's going into all of this. I got the block and all the bits properly cleaned as well (oil mud everywhere) and someone said that just having the engine properly cleaned and 'half rebuilt' would give me a performance increase alone, apart from the new heads and cams - fingers crossed! Once we get the engine back in and I've run her in a bit I'll report back with my findings !
All of this started with me seriosly looking at boring/stroking but apparently the siamese exhaust is the ultimate limiter of all this - it's a very hard squeeze on the lemon for not much juice - and I love my engine too much to replace it with anything else (maybe that will be my next project tho with a 2.0 doner chassis - there was a 2.9 cossie engine floating around on ebay a while back which was very tempting...) - after all my research I found that the one reliable way to get the biggest bang for your Cologne buck (according to Tickover who know their onions) was to get it stroked to 3.5ltrs (YES you read that right) by the guys in Car Clinic up north. I actually had a few long convos with them and they were very knowledgeable and helpful. But then again there are cheaper ways of getting a capri up to 200+BHP if thats what you really want (buy a pinto and tune it!), and like i said i love my cologne too much to have it drastically altered/replaced.