Wanted Original Laser wheels
-
- Posts: 20
- Joined: Sun Oct 29, 2017 12:56 pm
- Car(s): 1971 Mk3 Cortina 2.0 GT
1986 Capri 2.0 Laser
2018 Fiesta Titanium
2019 Focus St Line X
Wanted Original Laser wheels
Hi,
I'm toying with the idea of buying a set of 4 original laser wheels for my 86 Laser to fit during the winter months. Would, ideally, like a nice set with reasonable tyres if possible. I'm near Reading so local ish
Cheers, David
I'm toying with the idea of buying a set of 4 original laser wheels for my 86 Laser to fit during the winter months. Would, ideally, like a nice set with reasonable tyres if possible. I'm near Reading so local ish
Cheers, David
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Wanted Original Laser wheels
Give Tickover Boys in Dartford a shout as there a laser they have for parts ( I think ) which had four laser wheels on the other week . Then not a bad drive to pick up .
If not Martin May have a set at Capri Gear only thing postage will be a bit .
If not Martin May have a set at Capri Gear only thing postage will be a bit .
Ford Capri 2.0 Laser 1987 Mercury Grey .......
- pbar
- Posts: 7533
- Joined: Thu Jun 07, 2012 6:29 pm
- Car(s): Capri 2.0 Laser, frequent driver.
- Location: North-West
Re: Wanted Original Laser wheels
Everyone and his uncle seems to have Laser wheels in the garden shed, I'm sure you will find someone to help. I bought a very nice set on here from a good member to improve on the ones I had. Hopefully you will get them for around £10-£15 per wheel, that's the kind of price I paid.
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Wanted Original Laser wheels
As Paul has said there must be some near to you I see a very nice set on eBay for £100 but I think they are in Worcester
https://rover.ebay.com/rover/0/0/0?mpre ... 3599378103
I have been looking at 15” Brooklands wheels for sale on eBay but I must start saving for my headunit upgrade like Johns .
But have a look as they would look good on my little old laser ? And I think they will fit easy as well ...
https://rover.ebay.com/rover/0/0/0?mpre ... 3496601070
https://rover.ebay.com/rover/0/0/0?mpre ... 3599378103
I have been looking at 15” Brooklands wheels for sale on eBay but I must start saving for my headunit upgrade like Johns .
But have a look as they would look good on my little old laser ? And I think they will fit easy as well ...
https://rover.ebay.com/rover/0/0/0?mpre ... 3496601070
Ford Capri 2.0 Laser 1987 Mercury Grey .......
- Fordoholic Nick
- Donator
- Posts: 6206
- Joined: Sat Apr 19, 2014 3:40 pm
- Car(s): Ford Capri 2.0 Laser,
Ford Fiesta 1.6 TDCi - Location: Enfield, London
Re: Wanted Original Laser wheels
Hey J.Jasonmarie wrote:But have a look as they would look good on my little old laser ? And I think they will fit easy as well ...
https://rover.ebay.com/rover/0/0/0?mpre ... 3496601070
Those wheels look superb fella. You wont believe the difference the 7x15's will make to the stance of your Laser, but one point worth noting is that you may or may not have to consider your wheel studs fella. Martin kindly warned me to check that mine were long enough to take the 7" when he seen I bought the 7x15. He fitted some and had hardly any stud left for the wheel nuts. A few others did warn me on CW too. But I reckon my studs are longer than std as I have plenty of stud showing for the nuts and I already had 7x13's fitted fir three yrs with no issues anyway. It might be one of those try them first then you can see if you are happy with the studs. Easy enough to replace tbough. Tickover will do that in an hour for you if you need them. I would not sell your other ones till you fit these if you do decide to buy them. They will look stunning J.
All the best mate
Nick
I was born a Fordoholic, They'll bury me a Fordoholic...
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Wanted Original Laser wheels
Yes I do wonder what more pressure of parking as no power steering Gus did say he could have a play with the steering to get it a bit lighter for me as my back really feels it sometime when trying to park . Also they look the same as what I have so it works out £150 a corner for a extra 2” ? Marie just said go for it , don’t think she knew we was talking wheels .
Might ring that late night Capri drug line and see if they can talk me out of it ..... really good well worth downloading the App .......
So on my list is ..... headunit , amp ,dab , I pod adaptor then new front over rider & all new petrol pipes threw out .service .
Then seats & fishnet headrest reupholstered/ refurbish. Paint work look at on front of wing .( Martin looking at mays CCI meet ) The Tickover upgrade on the brakes .
So only a few little jobs to do
Might ring that late night Capri drug line and see if they can talk me out of it ..... really good well worth downloading the App .......
So on my list is ..... headunit , amp ,dab , I pod adaptor then new front over rider & all new petrol pipes threw out .service .
Then seats & fishnet headrest reupholstered/ refurbish. Paint work look at on front of wing .( Martin looking at mays CCI meet ) The Tickover upgrade on the brakes .
So only a few little jobs to do
Ford Capri 2.0 Laser 1987 Mercury Grey .......
- Andrew 2.8i
- Donator
- Posts: 14774
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Wanted Original Laser wheels
Yes, they would look good on your car Jason.Jasonmarie wrote:
But have a look as they would look good on my little old laser ? And I think they will fit easy as well ...
https://rover.ebay.com/rover/0/0/0?mpre ... 3496601070
The ones in the link are the older type with metal centre caps. Are they a bargain though? They look as though they might need a refurb as they look quite scratched and scuffed. The tyres are also over 5 years old, so they will probably need replacing for safety reasons.
Andrew.
Re: Wanted Original Laser wheels
Andrew 2.8i wrote:Yes, they would look good on your car Jason.Jasonmarie wrote:
But have a look as they would look good on my little old laser ? And I think they will fit easy as well ...
https://rover.ebay.com/rover/0/0/0?mpre ... 3496601070
The ones in the link are the older type with metal centre caps. Are they a bargain though? They look as though they might need a refurb as they look quite scratched and scuffed. The tyres are also over 5 years old, so they will probably need replacing for safety reasons.
Andrew.
At least £200 for new tyres so now getting quite expensive.... A better or cheaper set will come along, or save up and buy a new set from CCI
- Andrew 2.8i
- Donator
- Posts: 14774
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Wanted Original Laser wheels
So, at £695 for the wheels plus say £50 per wheel refurb makes a total of £895.
Take the tyres out of the equation as they'll probably have to be replaced.
A brand new set of CCI wheels are £820 and you can pick them up at the Nationals to save on the £40 postage.
https://www.ebay.co.uk/itm/Ford-Capri-2 ... 2133435536
Or they are £195 each (members price) on the website.
The only downside is that they have the clip-in plastic centre caps not metal locking ones like the wheels in the Ebay listing.
Andrew.
Take the tyres out of the equation as they'll probably have to be replaced.
A brand new set of CCI wheels are £820 and you can pick them up at the Nationals to save on the £40 postage.
https://www.ebay.co.uk/itm/Ford-Capri-2 ... 2133435536
Or they are £195 each (members price) on the website.
The only downside is that they have the clip-in plastic centre caps not metal locking ones like the wheels in the Ebay listing.
Andrew.
Re: Wanted Original Laser wheels
https://www.ebay.co.uk/itm/FORD-CAPRI-2 ... 100623.m-1Andrew 2.8i wrote:So, at £695 for the wheels plus say £50 per wheel refurb makes a total of £895.
Take the tyres out of the equation as they'll probably have to be replaced.
A brand new set of CCI wheels are £820 and you can pick them up at the Nationals to save on the £40 postage.
https://www.ebay.co.uk/itm/Ford-Capri-2 ... 2133435536
Or they are £195 each (members price) on the website.
The only downside is that they have the clip-in plastic centre caps not metal locking ones like the wheels in the Ebay listing.
Andrew.
I know of a newly refurbed set with new clip in centre caps, new ford badges and nearly new tyres......But I'm keeping them
Apparently, John Hill had some legal issues when he wanted to reproduce the locking centre caps, hence the clip in.
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Wanted Original Laser wheels
Do you know I never even thought of the Tyres so I was going down a expensive route . Also my Capri Drives so nice on the road I don’t really know what they would feel like . And if I don’t like them a expensive mistake .
Yes CCI look and better route to go down then he ones on eBay . But I think I will put that on hold for a few years .....
Yes CCI look and better route to go down then he ones on eBay . But I think I will put that on hold for a few years .....
Ford Capri 2.0 Laser 1987 Mercury Grey .......
-
- Posts: 20
- Joined: Sun Oct 29, 2017 12:56 pm
- Car(s): 1971 Mk3 Cortina 2.0 GT
1986 Capri 2.0 Laser
2018 Fiesta Titanium
2019 Focus St Line X
Re: Wanted Original Laser wheels
Still haven't got any yet, missed out on the listed wheels in Worchester, forgot when they ended and missed. Only other wheels out there at moment seem to be expensive or not a full set. No rush but would like some before the damp weather sets in. Will also need a full set of wheel nuts too..
- Fordoholic Nick
- Donator
- Posts: 6206
- Joined: Sat Apr 19, 2014 3:40 pm
- Car(s): Ford Capri 2.0 Laser,
Ford Fiesta 1.6 TDCi - Location: Enfield, London
Re: Wanted Original Laser wheels
Jason, I have been exactly where you are now mate...debating whether or not the extra 2" is gonna make a difference and if its money well spent...??? I had quite a few conversations with John before I finally decided Well mate I have to tell you that upgrading my 7x13 to 7x15 is one of the best things I done to B112. Immediately changed the stance of my Capri as I personally always thought the 13" looked just a tad small under my arches. Now I have lowered it over the 15" I have exactly the ride height/stance I have craved for. I sold my 7x13 to Des but was not greedy with the price but just enough to offset a bit of the cost of the 7x15's. I personally really like the new feel of how B112 drives now. Yep the single leafs lowered 1.5" give the car a much firmer ride but again I like this.Jasonmarie wrote:Also they look the same as what I have so it works out £150 a corner for a extra 2” ?
Jason the thing with the 7x15 wheels is the massive choice of tyres. You can almost name your price and have a big selection to choose from. But the wheels are not vitally important for you at the moment as you have quite a list there so you can wait and have a think but if you do decide to get them you wont be disappointed mate...albeit a bit less wealthy...ok...a lot less wealthy !!!!
Wow !! I like her style mate !!!!Jasonmarie wrote: Marie just said go for it
I was born a Fordoholic, They'll bury me a Fordoholic...
- Fordoholic Nick
- Donator
- Posts: 6206
- Joined: Sat Apr 19, 2014 3:40 pm
- Car(s): Ford Capri 2.0 Laser,
Ford Fiesta 1.6 TDCi - Location: Enfield, London
Re: Wanted Original Laser wheels
Good Luck with finding some mate, surely some will turn up soon.Mk3CortinaCapri wrote:Still haven't got any yet, missed out on the listed wheels in Worchester, forgot when they ended and missed. Only other wheels out there at moment seem to be expensive or not a full set. No rush but would like some before the damp weather sets in. Will also need a full set of wheel nuts too..
I was born a Fordoholic, They'll bury me a Fordoholic...
Re: Wanted Original Laser wheels
https://www.ebay.co.uk/itm/JBW-FORD-CAP ... ctupt=trueJasonmarie wrote:Do you know I never even thought of the Tyres so I was going down a expensive route . Also my Capri Drives so nice on the road I don’t really know what they would feel like . And if I don’t like them a expensive mistake .
Yes CCI look and better route to go down then he ones on eBay . But I think I will put that on hold for a few years .....
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Wanted Original Laser wheels
That’s funny Andy I just spotted them I think they are the same as nicks , yes I do like the way the 15” sit on the Capri , but mine drives so well it’s a shame to try changing something that I like .
But as you say no rush .
I should start doing a list of things to do as I start of well then go of on a next project that was not on my list .
But as you say no rush .
I should start doing a list of things to do as I start of well then go of on a next project that was not on my list .
Ford Capri 2.0 Laser 1987 Mercury Grey .......
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Wanted Original Laser wheels
Just spotted these laser wheels and very cheap
https://rover.ebay.com/rover/0/0/0?mpre ... 3202200761
https://rover.ebay.com/rover/0/0/0?mpre ... 3202200761
Ford Capri 2.0 Laser 1987 Mercury Grey .......
-
- Posts: 20
- Joined: Sun Oct 29, 2017 12:56 pm
- Car(s): 1971 Mk3 Cortina 2.0 GT
1986 Capri 2.0 Laser
2018 Fiesta Titanium
2019 Focus St Line X
Re: Wanted Original Laser wheels
Yes, look nice but they are quiet some way from me in Newcastle so to far. I'm looking at a set in Southsea for £120 but they look like they need tyres and also need refurbishing as have grey/black centres and no black centre caps... Sort of defeats the object as didn't want to pay extra for refurbishing and new tyres. Only wanted a set for winter use as don't want my polished rims to deteriorate.
https://www.ebay.co.uk/itm/Ford-Capri-L ... 1438.l2649
This one looks good but is the best one
https://www.ebay.co.uk/itm/Ford-Capri-L ... 1438.l2649
This one looks good but is the best one
Re: Wanted Original Laser wheels
If only for winter use maybe widen your search to Pepperpots or 13" 7 Spokes???Mk3CortinaCapri wrote:Yes, look nice but they are quiet some way from me in Newcastle so to far. I'm looking at a set in Southsea for £120 but they look like they need tyres and also need refurbishing as have grey/black centres and no black centre caps... Sort of defeats the object as didn't want to pay extra for refurbishing and new tyres. Only wanted a set for winter use as don't want my polished rims to deteriorate.
https://www.ebay.co.uk/itm/Ford-Capri-L ... 1438.l2649
This one looks good but is the best one
Re: Wanted Original Laser wheels
I hope you bought plenty at that price Paulpbar wrote:Everyone and his uncle seems to have Laser wheels in the garden shed, I'm sure you will find someone to help. I bought a very nice set on here from a good member to improve on the ones I had. Hopefully you will get them for around £10-£15 per wheel, that's the kind of price I paid.
Many sellers now asking stupid money for pretty poor wheels
In our area it's £60 per wheel for a refurb and around £50 for a 13" tyre fitted.....Soon adds up for a set of 4