Im looking to fit a quick release steering wheel to my MK3 but im clueless on what will fit.
I found this on burton power https://www.demon-tweeks.co.uk/motorspo ... wheel-boss
Anybody have any idea on what would fit and what I need.
Also I have the standard non power steering rack and stock 1.6 column.
Quick release steering wheel
-
- Posts: 8
- Joined: Wed Jan 25, 2017 11:46 pm
- Car(s): 1.6 1983 capri for sale
-
- Posts: 4412
- Joined: Mon Jul 28, 2008 1:17 pm
- Car(s): 1986 Ford Capri 2.0 Laser
2004 Mazda RX8 - Location: Surrey
- Contact:
Re: Quick release steering wheel
The issue is getting 3 compatible things. You need a steering wheel boss that fits the capri spline, and then that has to have the same PCD as the steering wheel and the quick release thingy. I managed to get a new momo boss, and quick release thingy (crappy one though), and steering wheel with momo PCD. That quick release adaptor looks better than my one.
This boss is the one I have:
http://www.burtonpower.com/parts-by-cat ... _model=117
And I think this is the quick release I have:
https://www.ebay.com/itm/Universal-Stee ... 2441984766
I like the idea a lot, having the steering wheel inside the house just adds an extra layer of security and peace of mind. I picked the style of quick release I did as it was a lot slimmer, and therefore easier to carry, but that also means it's a less solid fit - it wobbles a bit
This boss is the one I have:
http://www.burtonpower.com/parts-by-cat ... _model=117
And I think this is the quick release I have:
https://www.ebay.com/itm/Universal-Stee ... 2441984766
I like the idea a lot, having the steering wheel inside the house just adds an extra layer of security and peace of mind. I picked the style of quick release I did as it was a lot slimmer, and therefore easier to carry, but that also means it's a less solid fit - it wobbles a bit
- Andrew 2.8i
- Donator
- Posts: 14724
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Quick release steering wheel
Just the characteristic you need in a steering wheel........-JC- wrote: it's a less solid fit - it wobbles a bit
My view is, is it really worth the bother and expense to fit a quick release steering wheel? If it's for the peace of mind of extra security, in my opinion, there are better ways.
Andrew.
-
- Posts: 4412
- Joined: Mon Jul 28, 2008 1:17 pm
- Car(s): 1986 Ford Capri 2.0 Laser
2004 Mazda RX8 - Location: Surrey
- Contact:
Re: Quick release steering wheel
With security, the more the better imo. It's a good visual deterrent too I reckon. If I can dissuade the lowlife from even breaking in, that's worth it.Andrew 2.8i wrote:Just the characteristic you need in a steering wheel........-JC- wrote: it's a less solid fit - it wobbles a bit
My view is, is it really worth the bother and expense to fit a quick release steering wheel? If it's for the peace of mind of extra security, in my opinion, there are better ways.
Andrew.
Re: Quick release steering wheel
I tried one of those slim ball bearing types as it was bought as a gift, it was on for 2 minutes because of the extra play I took it off and told the mrs to send it back, I have a splined type now and there is no play at all nice and solid with no wobbles so nice and safe the only downfall is it is taller than the other type so the wheel is closer to you
Re: Quick release steering wheel
I've used an nrg one in the past which was pretty good, it was a ball bearing type and had a small amount of play but that was back on forward not side to side. But like fordperv says a splined one is probably your best bet for zero play
Ratty as fuck
- Will01
- Posts: 534
- Joined: Tue Oct 23, 2012 12:23 pm
- Car(s): Ford Capri 1.6GL 1981 (Track Project) & 2.0 GL 1979(Gone to Capri Heaven)
Alfa 156 GTA (Daily Driver)
Alfa 2.4JTD Sportwagon
Mini Cooper S (Wife's)
Old Jags & Riley's for fun - Location: Dumfries & Galloway
Re: Quick release steering wheel
I will be fitting a quick release to mine, but i have not found any that seem to have a good fit.
Going to get a boss wire eroded in time and then fit a decent quick release system to it. Bet it won't be cheap though!
Going to get a boss wire eroded in time and then fit a decent quick release system to it. Bet it won't be cheap though!
Plans have changed to just make a good fun Track Car