Hi Guys,
I am looking for a brake servo and cylinder for a 1983 capri 2.8i.
Thanks
Colin.
wanted 2.8i servo and cylinder
- Andrew 2.8i
- Donator
- Posts: 14784
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: wanted 2.8i servo and cylinder
Hi,
As you've probably guessed, original master cylinders in decent condition are hard to come by.
Apparently, the MC from a Granada can be fitted, have a look at Peter's build thread.
viewtopic.php?f=17&t=38650&start=100
Replacement items are still available to buy new.
Andrew.
As you've probably guessed, original master cylinders in decent condition are hard to come by.
Apparently, the MC from a Granada can be fitted, have a look at Peter's build thread.
viewtopic.php?f=17&t=38650&start=100
Replacement items are still available to buy new.
Andrew.
-
- Posts: 5
- Joined: Wed Aug 02, 2017 1:41 pm
- Car(s): Ford capri 2.8i 1983 (near finished restoration)
Re: wanted 2.8i servo and cylinder
Hi Andrew,
Thanks for your reply, it was really the servo i needed but would have liked to buy both in good nick.
Yeah seems i difficult one to get.
Colin
Thanks for your reply, it was really the servo i needed but would have liked to buy both in good nick.
Yeah seems i difficult one to get.
Colin
- Andrew 2.8i
- Donator
- Posts: 14784
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
- Fordoholic Nick
- Donator
- Posts: 6208
- Joined: Sat Apr 19, 2014 3:40 pm
- Car(s): Ford Capri 2.0 Laser,
Ford Fiesta 1.6 TDCi - Location: Enfield, London
Re: wanted 2.8i servo and cylinder
Colin you could always get your servo refurbished mate. Think there are a few companies who offer this and you get to keep the original....if you still have it of course ?
Check out this thread on here a while back with details of this....
viewtopic.php?f=13&t=50791&p=348370&hilit=Servo#p348370
Check out this thread on here a while back with details of this....
viewtopic.php?f=13&t=50791&p=348370&hilit=Servo#p348370
I was born a Fordoholic, They'll bury me a Fordoholic...
-
- Posts: 26
- Joined: Fri May 22, 2015 8:47 pm
- Car(s): Mk1 & 30s
Re: wanted 2.8i servo and cylinder
Hi Colin I have a 2.8i servo
Re: wanted 2.8i servo and cylinder
I have a spare master cylinder if you are having trouble finding one. I can't guarantee how good the seals are as its off a 33 years old car, so would benefit from having a seal kit fitted to be on the safe side.
Re: wanted 2.8i servo and cylinder
Colincol@cyp wrote:Hi Guys,
I am looking for a brake servo and cylinder for a 1983 capri 2.8i.
Thanks
Colin.
Since we last spoke I have now got one in stock if you're not already sorted.
-
- Posts: 5
- Joined: Wed Aug 02, 2017 1:41 pm
- Car(s): Ford capri 2.8i 1983 (near finished restoration)
Re: wanted 2.8i servo and cylinder
Thanks Martin, I will give you a call and thanks to all who replied.
Colin
Colin