Page 5 of 6

Re: Project: Metal Polishing

Posted: Mon Nov 26, 2018 5:39 pm
by andyd
Andrew 2.8i wrote: Hi Jason,
Nice slippers!
Best wishes for tomorrow.

Andrew.
Yes, atb JM :cheers:

Re: Project: Metal Polishing

Posted: Mon Nov 26, 2018 6:53 pm
by Jasonmarie
O yes the slippers :doh: it’s like a MOT now here , been coming in for so long now it’s like a 2nd home . But we are lucky or I am to have the NHS only thing the nurse that is on tonight has banned me from going out as I check the cars out parked up at the Shard nextdoor .

I will try later on .......... :cool:

Re: Project: Metal Polishing

Posted: Mon Nov 26, 2018 7:36 pm
by andyd

Re: Project: Metal Polishing

Posted: Mon Nov 26, 2018 8:11 pm
by Andrew 2.8i
andyd wrote:Just in case you need another :) https://www.ebay.co.uk/itm/FORD-CAPRI-M ... rk:36:pf:0
Nice find Andy, thanks.
I'll keep an eye on it. :)

Andrew.

Re: Project: Metal Polishing

Posted: Tue Nov 27, 2018 8:58 pm
by Jasonmarie
Legs switch on stated at 8.30 this morning and got out at 4pm , I sneezed and cock up everthing this morning then when the doctor said don’t laugh we all stated . Also collected my £1 bet from the doctor after he watched my video of the capris and said it made him wake up to what he does so people can lead a life again . But did ask why Andrew had a coffee cup on his bumper . Then I said about your tea towel when he said I think we all need looking at .
Also was talking about Paul’s history lessons articles we have running every week . I did say about nick with the petrol tank that even the nurses could not understand . She said but was there petrol in the tank . So hope all your ears were burning as I did talk about you all and what a great lot you all are .
Even had a ambulance layer on to bring me home so let’s hope that all done till this time nextyear .

Nick how you drive a bus in London I will never know mate .
But nice to be home with the kids and wife . Also will try and get that jet wash in the morning to see how it’s going . :beer:

Here’s a picture coming home .
Image

Re: Project: Metal Polishing

Posted: Tue Nov 27, 2018 9:15 pm
by Andrew 2.8i
Jasonmarie wrote: Here’s a picture coming home .
Image
Did they rush you home on blue lights as they were fed up listening to your Capri talk? :lol:
I'm glad everything went OK... :D

Andrew.

Re: Project: Metal Polishing

Posted: Wed Nov 28, 2018 10:26 am
by Jasonmarie
Yes all went ok thank you Andrew , I think my dad was more knackered then me as he come back with me , the traffic was bad coming back but they are not able to put the blue light on but can go in bus lanes .
Got my walking aids ready so no stopping me now .

Re: Project: Metal Polishing

Posted: Thu Nov 29, 2018 7:54 am
by Caprifan Rob
Jasonmarie wrote: Got my walking aids ready so no stopping me now .
Great that you’re home quickly Jason, as you said, they do amazing work.
All the best for a quick recovery, looking forward to seeing you on Strictly in the new year :whistle:

Re: Project: Metal Polishing

Posted: Thu Nov 29, 2018 9:55 am
by Jasonmarie
Cheers Rob , I think Birthday boy (Friday ) Nick is in to his ballroom dancing might have to ask him for some Tips . :lol:

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 6:23 am
by Andrew 2.8i
andyd wrote:Just in case you need another :) https://www.ebay.co.uk/itm/FORD-CAPRI-M ... rk:36:pf:0
I was outbid..... :roll:
Thanks for the link though.

Andrew.

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 7:12 am
by andyd
Andrew 2.8i wrote:
andyd wrote:Just in case you need another :) https://www.ebay.co.uk/itm/FORD-CAPRI-M ... rk:36:pf:0
I was outbid..... :roll:
Thanks for the link though.

Andrew.
Nevermind...Glad you didn't get auction fever :lol:

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 7:17 am
by Andrew 2.8i
andyd wrote:Glad you didn't get auction fever :lol:
Not this time! It might have been a different story if it was something I had to have......

Andrew.

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 9:39 am
by Peter-S
Andrew 2.8i wrote:
andyd wrote:Glad you didn't get auction fever :lol:
Not this time! It might have been a different story if it was something I had to have......

Andrew.

Feedback of 2,400+, you've had to have a few things then :lol:

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 9:55 am
by Andrew 2.8i
Peter-S wrote:
Feedback of 2,400+, you've had to have a few things then :lol:
:lol:
Touché :D

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 12:34 pm
by Jasonmarie
So here’s the update to the jet washer that has been hanging on the fence with clear coat on !
The verdict. No it’s gone really blemish and dark ? I did use panel wipe before using the clear coat and did spray 3 coats on , but it’s pants . So how the clear coat does not work has me baffled.

Image

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 3:31 pm
by Andrew 2.8i
Jasonmarie wrote:So here’s the update to the jet washer that has been hanging on the fence with clear coat on !
The verdict. No it’s gone really blemish and dark ? I did use panel wipe before using the clear coat and did spray 3 coats on , but it’s pants . So how the clear coat does not work has me baffled.

Image
Hi Jason,
That's a shame that the washer jet has gone like that after such a short length of time outside. That's clearcoat off the list then......

I've received my buffing wheels and compounds from Moleroda, so I can now use my bench grinder for polishing. I gave the relay cover another quick going over and can't believe the difference it has made. The depth of shine is incredible!
There's no stopping me now.... :D

Andrew.

Re: Project: Metal Polishing

Posted: Fri Nov 30, 2018 3:39 pm
by Jasonmarie
You could say your polish the job of easy now . I have also ordered some stuff from them as well not her yet as I will try using there compound on large brass clock parts .
For a second I have a picture of you in the garage with horse brass’s everywhere .... :lol:

Yes don’t know why that did not work also I don’t think it was that long outside really .

Re: Project: Metal Polishing

Posted: Sat Dec 01, 2018 9:05 am
by Andrew 2.8i
Jasonmarie wrote:You could say your polish the job of easy now
Here's the job I polished off the other day.

Image

I put my hand over it here to show the reflection...

Image

:D :D :D

Andrew.

Re: Project: Metal Polishing

Posted: Sat Dec 01, 2018 11:19 am
by Jasonmarie
That has come up better then new mate , your be bling -ing up under the bonnet soon ..... :beer:

Re: Project: Metal Polishing

Posted: Sat Dec 01, 2018 11:24 am
by andyd
Looks great Andrew :)