Noel's car

Use this forum to post you cars pictures, history and modifications.
User avatar
Noel
Donator
Donator
Posts: 530
Joined: Thu May 19, 2011 7:57 pm
Car(s): Capri 2.8i
Range Rover
M140i
Location: Twickenham

Re: Noel's car

Post by Noel »

Update since last year.

Front end now all done.
Grille and surrounds back to original plain black.
Bumpers powder coated and end covers done with HFVP
Image

Nasty fuel filter clamp replaced with recon one from Caprigear:
Image

Wheels refurbed and fresh tyres:
Image

New tyres made huge difference, steering wheel shake 50-60 all gone and much less road noise!
User avatar
Andrew 2.8i
Donator
Donator
Posts: 14723
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion
Contact:

Re: Noel's car

Post by Andrew 2.8i »

Hi Noel,
Your car is looking fantastic!
The Dunlop tyres look superb too, the tread pattern even looks right for the period. 8-)

Andrew.
Image
User avatar
Noel
Donator
Donator
Posts: 530
Joined: Thu May 19, 2011 7:57 pm
Car(s): Capri 2.8i
Range Rover
M140i
Location: Twickenham

Re: Noel's car

Post by Noel »

Hello been over 3 years so time for update. Long term rough running and low power finally had to be addressed.
I had compression tests done last year which found one cylinder with tight exhaust valve clearance and low compression. Re-setting tappet did not solve this, so knackered valve suspected.

Nothing for it but to book in head refurb, and finally got it done last month.
Heads came off for unleaded seats, new valve guides, new exhaust valves and new rocker shafts.
All top end parts and fittings cleaned up and re-painted.
Took opportunity to fit 6 new injectors too, plus new radiator and header tank (old one developed seep when disturbed).

Shiny bits look nice:
head.jpg
IMG_20210611_151715167sm.jpg


But what is most interesting is the state of the exhaust valves, here's the worst one that caused the compression loss. Very pitted, no wonder it didn't seal.
IMG_20210625_valve.jpg
Injectors came out looking grimy but generally OK bar number 6, on which the nozzle has disappeared up the spout, very weird. Must have been hosing fuel in this one because you can blow straight through it. Normal injector opening pressure is about 40psi so gawd knows how it was running on this cylinder.
IMG_20210625_inj.jpg


ANYWAY, after all this the running and general performance is back to normal, hasn't driven like this for years.
User avatar
Jasonmarie
Donator
Donator
Posts: 4707
Joined: Thu Aug 13, 2015 12:30 am
Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver
Location: Kent

Re: Noel's car

Post by Jasonmarie »

Glad you have sorted it sir
Ford Capri 2.0 Laser 1987 Mercury Grey ....... :beer:
User avatar
Andrew 2.8i
Donator
Donator
Posts: 14723
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion
Contact:

Re: Noel's car

Post by Andrew 2.8i »

It's good to hear that your car is now running well.
Where did you send the heads to have the unleaded conversion work done?

Andrew.
Image
User avatar
Noel
Donator
Donator
Posts: 530
Joined: Thu May 19, 2011 7:57 pm
Car(s): Capri 2.8i
Range Rover
M140i
Location: Twickenham

Re: Noel's car

Post by Noel »

Jenkins Motor Engineers did all the work, and I just got all the extra bits together. They are in Whitton south west London - traditional engine machine shop, but with full garage facilities too so a one stop shop. Despite being very local to me, I never knew they existed until a friend showed me his Austin A40 engine that they had rebuilt.
All very much up our street.
IMG_2680-sm.jpeg
http://www.jenkinsmotorengineers.co.uk/
Post Reply