newbie post: Perana build
- Kenyanperana
- Posts: 26
- Joined: Mon Oct 27, 2014 3:54 pm
- Car(s): Ford Capri Perana 5.0 V8
Re: newbie post: Perana build
Thanks, I was afraid that was the case. Better get down the gym!
Only homologated to 3.1 so am after a safe 250HP with a similar amount of torque. I will be racking up thousands of miles between rebuilds, and don't have £50k for a GAA Cosworth motor!
Only homologated to 3.1 so am after a safe 250HP with a similar amount of torque. I will be racking up thousands of miles between rebuilds, and don't have £50k for a GAA Cosworth motor!
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: newbie post: Perana build
250 Hp is possible from a 3.1 , as i said Ric Wood probably could build you a 250 Hp engine no problem they have all kinds of goodies to make a bulletproof engine like forged cosworth pistons and rods , Steel cranks and main caps , dry sump systems etc... , they also do alloy / aluminium heads which should shave a nice amount of weight off the engine
http://www.ricwood.com/essexv6.html
http://www.ricwood.com/essexv6.html
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.
- Kenyanperana
- Posts: 26
- Joined: Mon Oct 27, 2014 3:54 pm
- Car(s): Ford Capri Perana 5.0 V8
Re: newbie post: Perana build
Not allowed alloy heads! I know Ric and he is building Ian Duncan's engine - see above. A friend is building mine, which I am hoping will come out a little cheaper but will be a nice strong engine.
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: newbie post: Perana build
What a bugger they don't allow alloy heads , 250 is possible from an Essex with iron heads though Burton Power Stage 3 heads / full race heads are iron but they flow a whole lot better than standard ones , i would advise either use a tuftrided crank or a Ric Wood Steel crank for the bottom end
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.
- Kenyanperana
- Posts: 26
- Joined: Mon Oct 27, 2014 3:54 pm
- Car(s): Ford Capri Perana 5.0 V8
Re: newbie post: Perana build
I was afraid of that better get down the gym!
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: newbie post: Perana build
Yeah you probably should !
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.
- Kenyanperana
- Posts: 26
- Joined: Mon Oct 27, 2014 3:54 pm
- Car(s): Ford Capri Perana 5.0 V8
Re: newbie post: Perana build
Setting up the front and rear suspension on Ford rims
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: newbie post: Perana build
Can't see the pictures mate
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.
- Kenyanperana
- Posts: 26
- Joined: Mon Oct 27, 2014 3:54 pm
- Car(s): Ford Capri Perana 5.0 V8
Re: newbie post: Perana build
try again:
Can't upload them from an ipad for some reason...
Can't upload them from an ipad for some reason...
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: newbie post: Perana build
Looking better now , decided yet what to do about the engine?
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.
-
- Posts: 1838
- Joined: Tue May 06, 2014 8:47 pm
- Car(s): 2.8injection special
Re: newbie post: Perana build
Taking shape nicely, it's refreshing to see something different. Looking forward to seeing pictures of it in action.
- Kenyanperana
- Posts: 26
- Joined: Mon Oct 27, 2014 3:54 pm
- Car(s): Ford Capri Perana 5.0 V8
Re: newbie post: Perana build
We are using the Essex 3.1 V6:
should be ready soon!
should be ready soon!
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: newbie post: Perana build
Nice
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.
-
- Posts: 3
- Joined: Thu Jan 09, 2014 11:28 am
- Car(s): Currently between Capris
- Kenyanperana
- Posts: 26
- Joined: Mon Oct 27, 2014 3:54 pm
- Car(s): Ford Capri Perana 5.0 V8
Re: newbie post: Perana build
Latest dyno news - 230 BHP and 340 NM torque, not bad for an old Essex!! Should be a bit better after fettling but that will do for now!!
- MattMe
- Donator
- Posts: 569
- Joined: Thu Aug 21, 2014 10:43 am
- Car(s): Mk3 2.8 injection
Previously owned:
Facelift Mk1 V8
Mk3 2.0 Laser
Mk3 2.8i
Re: newbie post: Perana build
That's mental. No other words for it.
- MattMe
- Donator
- Posts: 569
- Joined: Thu Aug 21, 2014 10:43 am
- Car(s): Mk3 2.8 injection
Previously owned:
Facelift Mk1 V8
Mk3 2.0 Laser
Mk3 2.8i
Re: newbie post: Perana build
That's mental. No other words for it.
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: newbie post: Perana build
230 Hp and 250 lb/ft thats pretty good
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.