Here are some pics and info on my 2.8i Hope you like it
This is the codition of the body before any work and spraying.
Original old engine bay
Some info
1987 2.8i with a non genuine turbo technics conversion and that is where the story starts, about year ago I looked at it and thought how could I improve it, the engine was standard so the first think is to build a low comp turbo engine so I started collecting the best parts I can get my hands on, as I have found parts they have been fitted to the old engine for testing and fitment over a year later the engine is nearly ready and the cars come of the road this weekend 08/08/08 to have the engine fitted.
I will post pics on the engine fitment.
.
The Engine- 94mm low comp pistons
The Heads- stage 3 unleaded, bronze valve guides, valves 44.5mm / 38.1mm, steel cam gears, Piper 270 cam & valve springs.
Turbo T3 water cooled off a sierra cosworth when first fitted the turbo hit 22psi as the engine cut out it runs at 10psi now the min it will run at.
The engine is now black
UPDATE 28/08/2015
Car came off the road 08/08/2008 for the new engine to be fitted and that's it, it has been dry stored all this time I just not had the time to get
it dune.
.
Andy-mlm my 2.8 turbo
- Andy-mlm
- Posts: 169
- Joined: Mon Jul 28, 2008 9:34 pm
- Car(s): 1987 2.8 turbo low comp eng, stage 3 heads, hybrid turbo and intercooler
- Location: Rhyl North Wales
- Contact:
Andy-mlm my 2.8 turbo
Last edited by Andy-mlm on Sun Aug 30, 2015 11:59 pm, edited 25 times in total.
-
- Posts: 1273
- Joined: Mon Jul 28, 2008 5:08 am
- Car(s): Cosworth BOA, big exhaust, little bitty axle, bright yellow interior. Not exactly subtle.
- Location: South, Midlands, and North. :D
Re: Andy-mlm my 2.8 turbo
Lovely looking car Although I have to admit i'm a little dissapointed the gravel behind it looks so clean and un-donutted on. But then I guess the paintwork wouldn't look so nice- it's ying and yang isn't it!
Total number of friends who have so far managed to open the passenger door first time: 1.
-
- Posts: 1983
- Joined: Mon Jul 28, 2008 7:29 pm
- Car(s): capri 2.8, focus van, st focus
- Location: Hampshire
Re: Andy-mlm my 2.8 turbo
loverly looking car you got there andy,
Mickey c
Mickey c
- Andy-mlm
- Posts: 169
- Joined: Mon Jul 28, 2008 9:34 pm
- Car(s): 1987 2.8 turbo low comp eng, stage 3 heads, hybrid turbo and intercooler
- Location: Rhyl North Wales
- Contact:
Re: Andy-mlm my 2.8 turbo
Andy-mlm wrote:Here are some pics and info on my 2.8i Hope you like it
This is the codition of the body before any work and spraying.
Original old engine bay
Some info
1987 2.8i with a non genuine turbo technics conversion and that is where the story starts, about year ago I looked at it and thought how could I improve it, the engine was standard so the first think is to build a low comp turbo engine so I started collecting the best parts I can get my hands on, as I have found parts they have been fitted to the old engine for testing and fitment over a year later the engine is nearly ready and the cars come of the road this weekend 08/08/08 to have the engine fitted.
I will post pics on the engine fitment.
.
The Engine- 94mm low comp pistons
The Heads- stage 3 unleaded, bronze valve guides, valves 44.5mm / 38.1mm, steel cam gears, Piper 270 cam & valve springs.
Turbo T3 water cooled off a sierra cosworth when first fitted the turbo hit 22psi as the engine cut out it runs at 10psi now the min it will run at.
The engine is now black
UPDATE 28/08/2015
Car came off the road 08/08/2008 for the new engine to be fitted and that's it, it has been dry stored all this time I just not had the time to get
it dune.
.
- 3 Litre Power
- Posts: 471
- Joined: Tue Feb 24, 2015 4:41 pm
- Car(s): 1975 Capri II 3000 Ghia factory manual, 505k kms, Sunset Red, BVR, B.I
1988 Ford Escort XR3i Cabrio, 177k kms, Red, Black Top ( Daily ) - Location: In the garage...
Re: Andy-mlm my 2.8 turbo
My Mk2 Capri Facebook page https://www.facebook.com/FordCapriMk2
Oil and Coolant guru
Finnish but born and raised in Spain.
Oil and Coolant guru
Finnish but born and raised in Spain.
- Andrew 2.8i
- Donator
- Posts: 14724
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Andy-mlm my 2.8 turbo
Hi,
That's a stunning car, fantastic looking.
I like those matching rocker covers and plenum chamber, they will look awesome when fitted.
Have you still got the special wheels on, or have you changed them for fancier aftermarket ones.
Andrew.
That's a stunning car, fantastic looking.
I like those matching rocker covers and plenum chamber, they will look awesome when fitted.
Have you still got the special wheels on, or have you changed them for fancier aftermarket ones.
Andrew.