Wanted for mk3 laser
-
- Posts: 7
- Joined: Mon Feb 01, 2021 3:43 am
- Car(s): 2.0 laser mk3
Wanted for mk3 laser
Hi,
Looking for plastic strip off front of bonnet edge. Sunroof winding handle, front seat or someone who can re-upholsterer them. Rear wiper doesn't work, nor does heater. Tailgate won't lock.
Parts or advice welcome.
Looking for plastic strip off front of bonnet edge. Sunroof winding handle, front seat or someone who can re-upholsterer them. Rear wiper doesn't work, nor does heater. Tailgate won't lock.
Parts or advice welcome.
Re: Wanted for mk3 laser
I have new bonnet lip trim. Wiper not working is usually a bad connection on the contact rather than the motor. The non working heater is almost certainly a knackered motor.

- D366Y
- Donator
- Posts: 1920
- Joined: Mon Sep 03, 2012 2:26 pm
- Car(s): 1986 Laser 1.6, daily runaround project
1981 GL Auto 2.0, Barn-Find-Resto, now also a runaround project
1980 3.0S, crash damage resto
1993 Fiesta 1.1
Currently full up and no more space but I still want a 2.8... - Location: High Wycombe/Aylesbury
Re: Wanted for mk3 laser
There are two or three different types of sunroof winder handles as well - what year/model is the car you need it for?
Also, what type/style interior do you want/need for a front seat?
Also, what type/style interior do you want/need for a front seat?
A wise man once said... "you can never have too many capris - buy another"

Re: Wanted for mk3 laser
I `think` that although the handles themselves can be slightly different, they will all fit as the actual winder mechanism is the same? There was a post about this but I can`t find it: Martin could verify???
- D366Y
- Donator
- Posts: 1920
- Joined: Mon Sep 03, 2012 2:26 pm
- Car(s): 1986 Laser 1.6, daily runaround project
1981 GL Auto 2.0, Barn-Find-Resto, now also a runaround project
1980 3.0S, crash damage resto
1993 Fiesta 1.1
Currently full up and no more space but I still want a 2.8... - Location: High Wycombe/Aylesbury
Re: Wanted for mk3 laser
It was me!
https://www.fordcapriforum.com/forum/vi ... oof+handle
They do fit the same, but the base unit can be a different shape which was the issue I had so I took them both apart and rebuilt one working handle from it

A wise man once said... "you can never have too many capris - buy another"

-
- Posts: 7
- Joined: Mon Feb 01, 2021 3:43 am
- Car(s): 2.0 laser mk3
Re: Wanted for mk3 laser
How much and where are you? Interior is grey cloth with red and grey section
-
- Posts: 7
- Joined: Mon Feb 01, 2021 3:43 am
- Car(s): 2.0 laser mk3
Re: Wanted for mk3 laser
Hi, I am not getting messages. Try my email [email protected]