The Ford Capri Laser Page

Anyone know where I can get a new o-ring that goes from the master cylinder onto the hose?

Have you tried asking at a Ford garage if they still stock one or if they would compare it with one from a newer model eg late escort, early Focus etc. I bet they're all the same size.

Try this first but if you're really stuck I may have a secondhand one on an old servo that you could have.

Had no luck mate. Have you got that second hand one I could have?

If someone could determine the size it shouldn't be too hard to find a replacement?

https://www.toolstation.com/shop/p53005

Cowen99 wrote:Had no luck mate. Have you got that second hand one I could have?

I'll have a look in my pile of bits tomorrow or saturday morning and get back to you. Paul.

pbar wrote:If someone could determine the size it shouldn't be too hard to find a replacement?

https://www.toolstation.com/shop/p53005

I just thought of that reading then noticed you had a link already Paul

This Ebay seller stocks all the sizes of O-ring you could wish for.
https://www.ebay.co.uk/str/sealforceori ... lsolutions

Andrew.

You need a grommet to fit in the servo hole, not an o ring.

Perhaps Martin has a sprare one?

All the best
Neil

I had a real problem getting one of these, they are like rocking horse poo, and as it happens I have a rocking horse that delivers.
They need to be a very good fit to create a good seal other wise you just get vacuum hiss which effect the engine running and the brakes!. I would be very surprised if you can find anything but the real thing that will work.

there is one on ebay for £85 the valve and rubber, i think the price tells you how rare they are.

in the ended i ended up with a couple of them, so I have a spare, just PM me and you can have it




IMG_2060 by andrew harwood, on Flickr

Looks like a stopper from a money box

Arnoldhar wrote:I had a real problem getting one of these, they are like rocking horse poo, and as it happens I have a rocking horse that delivers.
They need to be a very good fit to create a good seal other wise you just get vacuum hiss which effect the engine running and the brakes!. I would be very surprised if you can find anything but the real thing that will work.

there is one on ebay for £85 the valve and rubber, i think the price tells you how rare they are.

in the ended i ended up with a couple of them, so I have a spare, just PM me and you can have it




IMG_2060 by andrew harwood, on Flickr

PM’d

Will take it