can you help guys !!!
-
- Posts: 11
- Joined: Fri Nov 10, 2017 6:19 pm
- Car(s): Ford Capri 1.6 laser.
D reg, 86
On the road
MOT
restoration project. - Location: Preston, lancs
can you help guys !!!
would really appreciate one of you guys posting a how to post images on this site -many thanks in anticipation Paul
- Andrew 2.8i
- Donator
- Posts: 14784
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: can you help guys !!!
Hi,Fordcaprilaser wrote:would really appreciate one of you guys posting a how to post images on this site -many thanks in anticipation Paul
No problem, all the info you need is here:
viewtopic.php?f=10&t=33174
Andrew.
- pbar
- Posts: 7561
- Joined: Thu Jun 07, 2012 6:29 pm
- Car(s): Capri 2.0 Laser, frequent driver.
- Location: North-West
Re: can you help guys !!!
Here you go -
This assumes you have a pic on your computer (for example on your desktop) already -
1. Go to https://postimages.org/ (you do not have to be a member or login)
2. Click Choose Images
3. Browse to the pic you wish to use and double click it (or click once and click Open)
4. Copy the Direct Link in the list (i.e. click the symbol on the right or highlight it and press Control-c)
5. Open up a new message window on here (as if to type your reply/new message, or whatever, as you normally would)
6. Type your message and when done click the Img button and then press Control-v (this will paste the link you previously copied in step 4)
7. Press Preview to see how it will look or Submit, and you're done.
This assumes you have a pic on your computer (for example on your desktop) already -
1. Go to https://postimages.org/ (you do not have to be a member or login)
2. Click Choose Images
3. Browse to the pic you wish to use and double click it (or click once and click Open)
4. Copy the Direct Link in the list (i.e. click the symbol on the right or highlight it and press Control-c)
5. Open up a new message window on here (as if to type your reply/new message, or whatever, as you normally would)
6. Type your message and when done click the Img button and then press Control-v (this will paste the link you previously copied in step 4)
7. Press Preview to see how it will look or Submit, and you're done.