Page 1 of 1

wanted 2.8i servo and cylinder

Posted: Fri Aug 04, 2017 10:56 am
by col@cyp
Hi Guys,
I am looking for a brake servo and cylinder for a 1983 capri 2.8i.

Thanks

Colin.

Re: wanted 2.8i servo and cylinder

Posted: Fri Aug 04, 2017 12:24 pm
by Andrew 2.8i
Hi,
As you've probably guessed, original master cylinders in decent condition are hard to come by.
Apparently, the MC from a Granada can be fitted, have a look at Peter's build thread.
viewtopic.php?f=17&t=38650&start=100
Replacement items are still available to buy new.

Andrew.

Re: wanted 2.8i servo and cylinder

Posted: Wed Aug 09, 2017 5:55 am
by col@cyp
Hi Andrew,

Thanks for your reply, it was really the servo i needed but would have liked to buy both in good nick.
Yeah seems i difficult one to get.

Colin

Re: wanted 2.8i servo and cylinder

Posted: Fri Aug 11, 2017 9:43 am
by Andrew 2.8i
Hi Colin,
Have you tried Martin at Caprigear?

Andrew.

Re: wanted 2.8i servo and cylinder

Posted: Fri Aug 11, 2017 7:41 pm
by Fordoholic Nick
Colin you could always get your servo refurbished mate. Think there are a few companies who offer this and you get to keep the original....if you still have it of course ?

Check out this thread on here a while back with details of this....

viewtopic.php?f=13&t=50791&p=348370&hilit=Servo#p348370

Re: wanted 2.8i servo and cylinder

Posted: Mon Aug 14, 2017 12:26 pm
by Rusty mick
Hi Colin I have a 2.8i servo

Re: wanted 2.8i servo and cylinder

Posted: Mon Aug 14, 2017 3:21 pm
by sheff
I have a spare master cylinder if you are having trouble finding one. I can't guarantee how good the seals are as its off a 33 years old car, so would benefit from having a seal kit fitted to be on the safe side.

Re: wanted 2.8i servo and cylinder

Posted: Mon Aug 14, 2017 9:54 pm
by Caprigear
col@cyp wrote:Hi Guys,
I am looking for a brake servo and cylinder for a 1983 capri 2.8i.

Thanks

Colin.
Colin
Since we last spoke I have now got one in stock if you're not already sorted.

Re: wanted 2.8i servo and cylinder

Posted: Wed Aug 30, 2017 8:55 am
by col@cyp
Thanks Martin, I will give you a call and thanks to all who replied.

Colin