Fully Fitted Mats
-
- Posts: 35
- Joined: Tue Mar 21, 2017 6:49 pm
- Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit
Fully Fitted Mats
I have produced some fully fitted and model specific (currently Capri 280, Tickford, and 2.8 Injection) mats. An exact match to the original factory fitted carpet, bound in leatherette, and each with the model logo embedded. Not cheap, but I have gone for quality over quantity. £125 per set plus recorded postage. I will probably be at the Capri National in May if anybody wants to save on postage, but please contact me beforehand if interested
Thanks
Saul 07957 112939
Thanks
Saul 07957 112939
-
- Donator
- Posts: 894
- Joined: Sun Jan 15, 2017 3:54 pm
- Car(s): Just sold 1983 2.8 Injection 5 speed. Currently restoring another classic Previously owned 2 Capris. Likely to own another at some point
Re: Fully Fitted Mats
Have you compared these with the CCI mats ?
-
- Posts: 35
- Joined: Tue Mar 21, 2017 6:49 pm
- Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit
Re: Fully Fitted Mats
Yes. With respect to CCI their mats are produced to a certain price point and as such differ in quality, and are not fully fitted. You pays your money and takes your choice
- Andrew 2.8i
- Donator
- Posts: 14784
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Fully Fitted Mats
Hi,
I'm tempted to buy a set of these mats. I'll be at the CCI National, so I'll come by and have a look at these to see the quality of them for myself.
I'm just curious, but why did you decide to have 2.8 embroidered above Injection on that particular logo? I would have thought it would have looked better to have it on one line to mirror the boot lid badge.
Andrew.
I'm tempted to buy a set of these mats. I'll be at the CCI National, so I'll come by and have a look at these to see the quality of them for myself.
I'm just curious, but why did you decide to have 2.8 embroidered above Injection on that particular logo? I would have thought it would have looked better to have it on one line to mirror the boot lid badge.
Andrew.
Last edited by Andrew 2.8i on Sat Apr 08, 2017 2:47 pm, edited 1 time in total.
- Jasonmarie
- Donator
- Posts: 4720
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Fully Fitted Mats
Nice but the drivers Mat is missing the square part that stops the Mat from wearing with your feet when you drive and the low end mats miss that part out as I bought some on eBay for the mini bus and my feet ripped them up in no time .
But very nice for show mats .
But very nice for show mats .
Ford Capri 2.0 Laser 1987 Mercury Grey .......
-
- Posts: 35
- Joined: Tue Mar 21, 2017 6:49 pm
- Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit
Re: Fully Fitted Mats
Over the years I guess several embroidery designs for 2.8 injection have been used - on these I've used this one Andrew
In my experience factory fitted mats do not have drivers side 'pads' as they are not required when a good quality carpet is used, and from an aesthetic point of view in my opinion look clumsy Jasonmarie
In my experience factory fitted mats do not have drivers side 'pads' as they are not required when a good quality carpet is used, and from an aesthetic point of view in my opinion look clumsy Jasonmarie
- Jasonmarie
- Donator
- Posts: 4720
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Fully Fitted Mats
No your right they do look clean but I would ban my wife with her high heels I know you have done tickford & 280 but any with just capri or laser ?
Ford Capri 2.0 Laser 1987 Mercury Grey .......
-
- Posts: 35
- Joined: Tue Mar 21, 2017 6:49 pm
- Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit
Re: Fully Fitted Mats
No, but I can do if required (firm)
- Andrew 2.8i
- Donator
- Posts: 14784
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Fully Fitted Mats
Hi,
I take it you didn't take any mats to the National? I kept an eye out, but I didn't see you anywhere.
Andrew.
I take it you didn't take any mats to the National? I kept an eye out, but I didn't see you anywhere.
Andrew.
-
- Posts: 35
- Joined: Tue Mar 21, 2017 6:49 pm
- Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit
Re: Fully Fitted Mats
Yes I was there Andrew, but I didn't take a Capri so parked up in the non Capri parking area and thus didn't have my wears on show. Brought a set of each plus a few Bosch fuel pumps - showed them to a few people who I got chatting with - all positive feed back - I had a good wander around but evidently unfortunately we didn't bump into each other
Maybe we've spoken/met in the past at the National - I'm good friends with Jason Craze so normally have a walk around with him and Mark from the 280 register
Saul
Maybe we've spoken/met in the past at the National - I'm good friends with Jason Craze so normally have a walk around with him and Mark from the 280 register
Saul
-
- Posts: 35
- Joined: Tue Mar 21, 2017 6:49 pm
- Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit
Re: Fully Fitted Mats
2.8 injection logo has been revised
Thanks
https://www.ebay.co.uk/itm/Ford-Capri-M ... ELnPKb2fEA
upload pictures free
Thanks
https://www.ebay.co.uk/itm/Ford-Capri-M ... ELnPKb2fEA
upload pictures free