Just in - Breaking 2.8 injection.
Just in - Breaking 2.8 injection.
Just arrived - Breaking
2.8I 1984, has been changed from 5 speed to 4 speed.
Interior and rear axle are already spoken for.
Most other parts are available. PM me with requirements.
Also, arriving later next week - Breaking.
2.8 injection Special, Interior and bodyshell are tatty but car is complete
2.8I 1984, has been changed from 5 speed to 4 speed.
Interior and rear axle are already spoken for.
Most other parts are available. PM me with requirements.
Also, arriving later next week - Breaking.
2.8 injection Special, Interior and bodyshell are tatty but car is complete
- Andrew 2.8i
- Donator
- Posts: 14723
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Just in - Breaking 2.8 injection.
Mart, have you not got a Black Carpet from a model without the full console? I'm not looking for a After market one
MAny thanks sport
With kind regards
Grant
MAny thanks sport
With kind regards
Grant
Re: Just in - Breaking 2.8 injection.
I don't think so Grant but I will have a look through my stack of carpets on Monday for you.
- aferraridino
- Posts: 13
- Joined: Sat Jan 31, 2015 9:56 pm
- Car(s): Ford Capri 1979 3.0s
Re: Just in - Breaking 2.8 injection.
if you find two i been after one for last 3 months lol.
- Tickford Man
- Posts: 1339
- Joined: Tue Jul 29, 2008 1:41 pm
- Car(s): Tickford + 3 x 2.8i
Re: Just in - Breaking 2.8 injection.
Grant!!!
You just reminded me, I got your text about this and forgot all about it!
It's been over 5 years as it was at the 40th Capri Brooklands bash and we just had the 45th last sept!!
I have one piece carpets, but not in black....
John Hill from CCI recently reported that he dyed one black with good results..
Not on here much and don't use PM, so please email direct to johnocapriman (at) outlook.com or you already have my moby....
Johno
You just reminded me, I got your text about this and forgot all about it!
It's been over 5 years as it was at the 40th Capri Brooklands bash and we just had the 45th last sept!!
I have one piece carpets, but not in black....
John Hill from CCI recently reported that he dyed one black with good results..
Not on here much and don't use PM, so please email direct to johnocapriman (at) outlook.com or you already have my moby....
Johno
-
- Posts: 45
- Joined: Wed Feb 11, 2015 3:28 am
- Car(s): Vauxhall Vectra 1.9CDTi (Daily Drive)
Lotus Carlton (better than factory produced)
MKII Cortina
MKII Escort
MKIII RS 1600i Escort
Re: Just in - Breaking 2.8 injection.
Do you have any of the Atlas Axles with slippers in?
If so, how much? I'm considering fitting one of those in place of the English Axle on my MKII Cortina project car.
HB
If so, how much? I'm considering fitting one of those in place of the English Axle on my MKII Cortina project car.
HB
-
- Posts: 1
- Joined: Mon Jan 19, 2015 10:47 pm
- Car(s): 1979 signal orange xpack Mk3 with rover v8 4.0L
Re: Just in - Breaking 2.8 injection.
Hi,
I need the corner cups and u clamps for front anti roll bar. I don't need the actual arb itself.
Can you help?
Thanks
Andy
I need the corner cups and u clamps for front anti roll bar. I don't need the actual arb itself.
Can you help?
Thanks
Andy
Re: Just in - Breaking 2.8 injection.
The car that came in today has a LSD axle. Somebody else has first refusal on it but if thery dick me about then I'll let you know ASAP.Heavy Bomber wrote:Do you have any of the Atlas Axles with slippers in?
If so, how much? I'm considering fitting one of those in place of the English Axle on my MKII Cortina project car.
HB
-
- Posts: 45
- Joined: Wed Feb 11, 2015 3:28 am
- Car(s): Vauxhall Vectra 1.9CDTi (Daily Drive)
Lotus Carlton (better than factory produced)
MKII Cortina
MKII Escort
MKIII RS 1600i Escort
Re: Just in - Breaking 2.8 injection.
Following on from our conversation yesterday, don't worry about this now, I have decided to stick with the English axle and it looks like I have a source for new plated slippers for less that the price of a 2nd hand german jobby.Caprigear wrote:The car that came in today has a LSD axle. Somebody else has first refusal on it but if thery dick me about then I'll let you know ASAP.Heavy Bomber wrote:Do you have any of the Atlas Axles with slippers in?
If so, how much? I'm considering fitting one of those in place of the English Axle on my MKII Cortina project car.
HB
Cheers
- eloise
- Posts: 266
- Joined: Fri Apr 24, 2009 2:07 pm
- Car(s): 2.9 cosworth inj, S1 rs turbo, t25 campervan, jag xtype, Reno megane, honda c50, Vespa gt200.
Re: Just in - Breaking 2.8 injection.
Hi Martin,
I emailed you a couple of weeks ago. Have you got a good condition passenger door in stock or on a breaker?
Cheers Neil.
I emailed you a couple of weeks ago. Have you got a good condition passenger door in stock or on a breaker?
Cheers Neil.
oh no what have i started!
Re: Just in - Breaking 2.8 injection.
Neil
Sorry, I don't recall seeing that E Mail. I have quite a few passenger doors. I'll go through them on Monday and will pick out the best.
Sorry, I don't recall seeing that E Mail. I have quite a few passenger doors. I'll go through them on Monday and will pick out the best.
- eloise
- Posts: 266
- Joined: Fri Apr 24, 2009 2:07 pm
- Car(s): 2.9 cosworth inj, S1 rs turbo, t25 campervan, jag xtype, Reno megane, honda c50, Vespa gt200.
Re: Just in - Breaking 2.8 injection.
Yeah, was on 27th February, if you could, just found my spare to be full of gobbo and rust and the one on the car is turning to powder.
Cheers
Neil
Cheers
Neil
oh no what have i started!
Re: Just in - Breaking 2.8 injection.
Neil
Really sorry about that. I'll go through my stock tomorrow and will report back tomorrow evening.
Really sorry about that. I'll go through my stock tomorrow and will report back tomorrow evening.
-
- Posts: 81
- Joined: Wed Oct 03, 2012 7:27 pm
- Car(s): ford capri 2.8i ford capri 1.6 laser auto bmw e46 rover p6 restoration project
- Location: gt yarmouth
Re: Just in - Breaking 2.8 injection.
you have interior light?
Re: Just in - Breaking 2.8 injection.
Yes, I have the one in the roof above the passenger door and also the other one that goes in the rear hatch trim. Which one do you need?
Let me know and I'll get you a delivered total.
Thanks, Martin.
Let me know and I'll get you a delivered total.
Thanks, Martin.
-
- Posts: 81
- Joined: Wed Oct 03, 2012 7:27 pm
- Car(s): ford capri 2.8i ford capri 1.6 laser auto bmw e46 rover p6 restoration project
- Location: gt yarmouth
Re: Just in - Breaking 2.8 injection.
the one above the passenger door
Re: Just in - Breaking 2.8 injection.
You have a PM.
-
- Posts: 1
- Joined: Tue Mar 24, 2015 4:28 pm
- Car(s): capri
Re: Just in - Breaking 2.8 injection.
hi
would you have a bonnet and 2 doors for capri mk3
would you have a bonnet and 2 doors for capri mk3
Re: Just in - Breaking 2.8 injection.
I have a bonnet and passenger door but no drivers doors.