Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Capri Parts For Sale and Wanted
ickyrsesc
Posts: 21
Joined: Wed Nov 06, 2013 9:00 pm
Car(s): Volvo xc90 daily driver , group 4 2.3 duratec mk2 rs mexico, standard rs2000 mk 2, Nimbus grey 1986 2.8 special Capri restoration

Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby ickyrsesc » Tue Apr 29, 2014 7:20 pm

Hi

Could anyone advise me where I can purchase a gasket from for the Capri 2.8 injection, Thermo Time Switch Housing also after a decent thermostat housing.

Also after a original sized fuel filter which goes under the bonnet mounted to the inner wing.

any help would be much appreciated.


Thanks Icky 07751871640

r2vdh
Posts: 445
Joined: Tue Nov 30, 2010 3:51 am
Car(s): 2.8EFI Turbo special with LPG
Location: Sussex

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Ga

Postby r2vdh » Wed Apr 30, 2014 10:26 pm

Simples just buy yourself some gasket paper and cut your own out 8-)

ukfpv
Posts: 27
Joined: Tue Mar 21, 2017 6:49 pm
Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby ukfpv » Sat Sep 09, 2017 7:29 pm

Anybody know the part number for the thermo time switch gasket? Whenever I approach my Ford dealer getting them to power up their microfiche reader evidently proves too much for them, thus I end up getting nowhere!

Paul G
Posts: 1034
Joined: Fri Jul 03, 2015 5:21 pm
Car(s): MK 3 3.0S needing restoration, 2.0S, 1.6 Laser (nearly ready), Fiesta mK2 pop plus, Skoda Octavia VRS, Rover SD1 Vitesse.
Location: High Wycombe

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby Paul G » Sat Sep 09, 2017 7:31 pm

Have you tried Tickover, Capri Club International or Capri Gear?

User avatar
Andrew 2.8i
Donator
Donator
Posts: 10740
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby Andrew 2.8i » Sun Sep 10, 2017 7:26 am

ukfpv wrote:Anybody know the part number for the thermo time switch gasket? Whenever I approach my Ford dealer getting them to power up their microfiche reader evidently proves too much for them, thus I end up getting nowhere!

Hi,
That's always an issue!
The FINIS for the thermotime housing gasket is 6024531. I last bought one three years ago, they were £0.92 each.

Andrew.
Image

ukfpv
Posts: 27
Joined: Tue Mar 21, 2017 6:49 pm
Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby ukfpv » Sun Sep 10, 2017 11:06 am

Excellent, that's great thanks Andrew

I don't suppose per chance you or anybody else on here has a full set of microfiche cards for the Capri? I do ask at the Ford dealers I pop into every now and then, but they all seam to have just one set (if any) which they're not too keen on letting go. It's always good to have the part numbers as they can easily be searched for on Fords computer system rather than doing it by a hook or by crook description method which tends to a) get lost in translation, b) oh, I'll look later response from the parts person, never to be heard of again

Thanks again Andrew. BTW I'll have to hook up with you re those mats in due course

ukfpv
Posts: 27
Joined: Tue Mar 21, 2017 6:49 pm
Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby ukfpv » Mon Sep 11, 2017 7:56 am

No longer serviced. Don't suppose you purchased a couple for spares purposes Andrew which you'd be willing to let go? I do have gasket paper but I'd prefer to have the proper item

Thanks

User avatar
Andrew 2.8i
Donator
Donator
Posts: 10740
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby Andrew 2.8i » Mon Sep 11, 2017 2:58 pm

ukfpv wrote: Don't suppose you purchased a couple for spares purposes Andrew which you'd be willing to let go?

Hi,
Sadly, I don't have any spares. Sorry.
It might be worth trying another dealer to ask if they have any old stock knocking about.

Andrew.
Image

ukfpv
Posts: 27
Joined: Tue Mar 21, 2017 6:49 pm
Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby ukfpv » Tue Sep 12, 2017 5:45 am

Yes, I'll do that

Odd this gasket isn't in the 'sets' on the market

Thanks

User avatar
Andrew 2.8i
Donator
Donator
Posts: 10740
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby Andrew 2.8i » Sat Nov 04, 2017 1:25 pm

ukfpv wrote:Odd this gasket isn't in the 'sets' on the market

Hi,
It is, but it's a lot to pay if you only need the one gasket.
https://www.ebay.co.uk/itm/HEAD-GASKET- ... 0123615335
Still, it is handy to have various spare gaskets to hand.

By the way, I've sent you a pm.

Andrew.
Image

ukfpv
Posts: 27
Joined: Tue Mar 21, 2017 6:49 pm
Car(s): FPV Pursuit ute, Capri 280, Audi A4 cabrio, rusty Transit

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Postby ukfpv » Sat Dec 02, 2017 11:32 am

Thanks Andrew - yes, looks as though it includes a gasket for the thermo time switch housing - good good

Have replied to your PM - sorry didn't notice you'd sent it for quite a while

Thanks

Saul


Return to “Parts For Sale/Wanted”

Who is online

Users browsing this forum: No registered users and 7 guests