Page 1 of 1

Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Tue Apr 29, 2014 7:20 pm
by ickyrsesc
Hi

Could anyone advise me where I can purchase a gasket from for the Capri 2.8 injection, Thermo Time Switch Housing also after a decent thermostat housing.

Also after a original sized fuel filter which goes under the bonnet mounted to the inner wing.

any help would be much appreciated.


Thanks Icky 07751871640

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Ga

Posted: Wed Apr 30, 2014 10:26 pm
by r2vdh
Simples just buy yourself some gasket paper and cut your own out 8-)

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Sat Sep 09, 2017 7:29 pm
by ukfpv
Anybody know the part number for the thermo time switch gasket? Whenever I approach my Ford dealer getting them to power up their microfiche reader evidently proves too much for them, thus I end up getting nowhere!

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Sat Sep 09, 2017 7:31 pm
by Paul G
Have you tried Tickover, Capri Club International or Capri Gear?

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Sun Sep 10, 2017 7:26 am
by Andrew 2.8i
ukfpv wrote:Anybody know the part number for the thermo time switch gasket? Whenever I approach my Ford dealer getting them to power up their microfiche reader evidently proves too much for them, thus I end up getting nowhere!
Hi,
That's always an issue!
The FINIS for the thermotime housing gasket is 6024531. I last bought one three years ago, they were £0.92 each.

Andrew.

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Sun Sep 10, 2017 11:06 am
by ukfpv
Excellent, that's great thanks Andrew

I don't suppose per chance you or anybody else on here has a full set of microfiche cards for the Capri? I do ask at the Ford dealers I pop into every now and then, but they all seam to have just one set (if any) which they're not too keen on letting go. It's always good to have the part numbers as they can easily be searched for on Fords computer system rather than doing it by a hook or by crook description method which tends to a) get lost in translation, b) oh, I'll look later response from the parts person, never to be heard of again

Thanks again Andrew. BTW I'll have to hook up with you re those mats in due course

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Mon Sep 11, 2017 7:56 am
by ukfpv
No longer serviced. Don't suppose you purchased a couple for spares purposes Andrew which you'd be willing to let go? I do have gasket paper but I'd prefer to have the proper item

Thanks

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Mon Sep 11, 2017 2:58 pm
by Andrew 2.8i
ukfpv wrote: Don't suppose you purchased a couple for spares purposes Andrew which you'd be willing to let go?
Hi,
Sadly, I don't have any spares. Sorry.
It might be worth trying another dealer to ask if they have any old stock knocking about.

Andrew.

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Tue Sep 12, 2017 5:45 am
by ukfpv
Yes, I'll do that

Odd this gasket isn't in the 'sets' on the market

Thanks

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Sat Nov 04, 2017 1:25 pm
by Andrew 2.8i
ukfpv wrote:Odd this gasket isn't in the 'sets' on the market
Hi,
It is, but it's a lot to pay if you only need the one gasket.
https://www.ebay.co.uk/itm/HEAD-GASKET- ... 0123615335
Still, it is handy to have various spare gaskets to hand.

By the way, I've sent you a pm.

Andrew.

Re: Wanted Capri 2.8 injection,Thermo Time Switch Housing Gasket

Posted: Sat Dec 02, 2017 11:32 am
by ukfpv
Thanks Andrew - yes, looks as though it includes a gasket for the thermo time switch housing - good good

Have replied to your PM - sorry didn't notice you'd sent it for quite a while

Thanks

Saul