Help with parts...............

Please restrict your questions and replies to Capri related technical issues!
hillside280

Help with parts...............

Postby hillside280 » Thu Nov 16, 2006 9:23 pm

I'm fitting a replacement oil cooler to the 280 and I need three new seals.
1. Cooler to engine block.
2. Filter housing to cooler
3. Seal inside the filter housing where the threaded extension passes through.

Does anyone know if these are still available?

computershack

Re: Help with parts...............

Postby computershack » Thu Nov 16, 2006 11:00 pm

Yes they are. I had the cooler to engine block one fail on my capper just before Xmas. Didn't half throw the oil out quick. They're still on Ford parts list. Failing that, the O rings are the same size as the ones on the oil filters.

hillside280

Re: Help with parts...............

Postby hillside280 » Fri Nov 17, 2006 10:15 am

Any idea of part numbers?

computershack

Re: Help with parts...............

Postby computershack » Fri Nov 17, 2006 11:11 am

Sorry, no. I'm lucky that the bloke in the parts department at my local Ford dealership has been there since they brought out the Model T. Spot on bloke. Once when I needed a thermostat housing for a 2L Capper, he ordered a Sierra one as a Capri one was EOL and automagically ordered the pukka blanking kit for the extra pipe connector to go with it without needing to be asked.

partsguru280

hey conor you need the following..................

Postby partsguru280 » Fri Nov 17, 2006 12:27 pm

cooler to enigne 1579875
filter to cooler 1023905
o/f extension 6026275(nut seal)
" 6100041
" 1023905


you should find m.w.r. keep em all matey if it helps.
cheers
chris

partsguru280

sorry should read hey 280

Postby partsguru280 » Fri Nov 17, 2006 12:27 pm

doh!
chris

Titan grau
Posts: 9
Joined: Sat Aug 26, 2017 11:59 am
Car(s): 2.8i Special Mercury Grey over Stratos Silver

Re: Help with parts...............

Postby Titan grau » Mon Apr 16, 2018 6:37 pm

Just running in to this stuff myself, while doing a little research I found the useful exploded diagram at the link below

http://www.fordopedia.org/parts-catalog ... 8-v6/A3.30

Also found, a very similar copper washer is availalbe from Simply Bearings Ltd simplybearings.co.uk

User avatar
nigecapri
Posts: 5706
Joined: Mon Jul 28, 2008 6:31 am
Car(s): Black 2.0S with supercharged bike carbs.
Location: http://www.blacklabradorpuppies.co.uk/
Contact:

Re: Help with parts...............

Postby nigecapri » Thu Apr 19, 2018 7:12 pm

Good shout there Titan grau,
Circulating links like that will be a valuable help to other owners.
Cheers.


Return to “Q & A”

Who is online

Users browsing this forum: No registered users and 22 guests

cron