Hi all,
I have this Haynes:
And page 75 is blank in my copy, only white. There should be paragraphs 18 (Accelerator shaft and pedal) and 19 (Inlet manifold) for chapter 3 (Fuel and exhaust system).
Could anybody scan this page and post it here or send me in PM? I'd appreciate it very much.
Thanks in advance.
Tom
Haynes Capri II+III 2.8 & 3.0
- Andrew 2.8i
- Donator
- Posts: 14724
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Haynes Capri II+III 2.8 & 3.0
Hi Tom,
Here you go:
Andrew.
- T.M.
- Posts: 415
- Joined: Mon Aug 14, 2017 9:26 pm
- Car(s): Capri 2.8 Injection (1984)
- Location: Czech Rep.
Re: Haynes Capri II+III 2.8 & 3.0
Hi Andrew,
thanks a lot! You are the best.
Tom
- Andrew 2.8i
- Donator
- Posts: 14724
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Haynes Capri II+III 2.8 & 3.0
No its supposed to be like that. Smear olive oil over the page and heat it over a 100W filament bulb and the text will become visible. But you must eat the page once your repairs are complete as it is highly classified.T.M. wrote: ↑Sat Apr 11, 2020 6:41 pm Hi all,
I have this Haynes:
And page 75 is blank in my copy, only white. There should be paragraphs 18 (Accelerator shaft and pedal) and 19 (Inlet manifold) for chapter 3 (Fuel and exhaust system).
Could anybody scan this page and post it here or send me in PM? I'd appreciate it very much.
Thanks in advance.
Tom
I'm the one who leaves all those shoes in the carriageway.
- T.M.
- Posts: 415
- Joined: Mon Aug 14, 2017 9:26 pm
- Car(s): Capri 2.8 Injection (1984)
- Location: Czech Rep.
Re: Haynes Capri II+III 2.8 & 3.0
Oh, I see! I'm not so experienced spy yet, so it was only blank page for me.
Tom