The Ford Capri Laser Page

Evening all, apologies if this is in the wrong place but posting this to help my mate who is trying to find a manifold for a customers incredibly original 1974 Mk2 Cortina. The current manifold is porous & letting water into the outer 2 cylinders & seized the engine.

Attached photo is of the Inlet Manifold off the 1974 Mk3 Cortina 1.6 we are recommissioning.
It has a 1.6 Pinto Low Compression engine (TL16L) which according to Wiki was used in the Capri from 1975, so hopefully the Capri community may be able to help.

The part number cast in to the aluminium is 75HF-9425-CA but I haven’t managed to cross reference that with a Finis code. I have seen similar manifolds but with the crankcase breather port in a different position but that wouldn't matter particularly. The key issue is the 2 bolt fixing for the carb.

I think I may have one that looks like this or similar in a box somewhere (no promises) - let me see if I can find it and I'll let you know?

Cheers
Danny

Hi Danny,

Many thanks mate

Just been emailed photos of the carb, Motorcraft 1V perhaps ?

No idea but it's cheap!

https://www.ebay.co.uk/p/Ford-Carburett ... /604737806

Have looked in one storage place for that manifold but can't find it, must be at my dad's place if it's anywhere and am there on Thursday and the weekend so will see if I can find it at all

Cheers

Thanks for the link mate, have passed that on

Thanks for looking for the manifold, my mate & I appreciate your efforts, good luck searching at your dads

Cheers

Any joy with your searching Danny ?

Lord Flasheart wrote: ↑Sat Jul 20, 2019 10:13 pm Any joy with your searching Danny ?

Haven't found it yet, got annoyed looking for it over the weekend but realised as soon as I got home Sunday night that I think I know where it is so will ask my dad to look tonight when he is home - fingers crossed it's there (and that it's the right part!)

No probs mate .... thanks for looking, fingers crossed your dad comes up trumps

Lord Flasheart wrote: ↑Mon Jul 22, 2019 9:34 am No probs mate .... thanks for looking, fingers crossed your dad comes up trumps

Found both the manifolds I have in the garage... one is a 32/36 weber manifold, the other is a 34ICH manifold
The 34ICH looks very similar though so not sure if it would be usable? The part number is 82HF-9425-AA but let me know if it's wanted/needed - you can have the carb as well if you want it, depends if he's desperate to use the car or not I guess haha

Cheers
Danny

Hi Danny,

Many thanks mate, very much appreciated

Any chance you could take a couple of photos of what you have & either post on here or PM / e-mail me. I can then forward to my mate & he can decide what he could possibly use or not

Many thanks again for all your efforts

Cheers

Gary

Lord Flasheart wrote: ↑Tue Jul 23, 2019 12:37 pm Hi Danny,

Many thanks mate, very much appreciated

Any chance you could take a couple of photos of what you have & either post on here or PM / e-mail me. I can then forward to my mate & he can decide what he could possibly use or not

Many thanks again for all your efforts

Cheers

Gary

Hi Gary, here are the pictures I have - if it's of interest I can try cleaning it up a bit but it just went straight into the shed when it came off so hasn't seen light for a few years

I also still have the instruction manual for the carb as well - I definitely know where that is so won't take long to find!

Cheers

Thanks Danny, I'll pass those on to my mate & let you know as soon as I do

Many thanks mate