Please restrict your questions and replies to Capri related technical issues!
4 posts • Page 1 of 1
I`m fairly certain the front and rear are the same part. It`s quite easy to fit a new stud, just bore out the original hole, cut a piece of threaded studding (M8 IIRC) to length and cement in with JB Weld/chemical metal etc. Just make sure there`s no excess material around the bottom of the stud to prevent overrider sitting flush on the bumper.
- Posts: 3009
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby
Mercedes Vito Traveline 2.2 Big Bus Daily Driver
- Location: Kent
Yes they are the same I have had two fitted and the match is really good .
Ford Capri 2.0 Laser 1987 Mercury Grey .......