Measurements for decals on laser with side repeaters

[Gerard mcilwaine]

Hi guys I'm wondering if anyone has the measurements for decals on laser with side repeaters

[Jasonmarie]

Funny as I just got asked that question I will have a quick look and post a picture up . I am sure one Capri Dan has this as well .

Yes here’s the measurements on mine .

[Brooksy]

Hi Gerard

Do you need the measurements for locating just the laser decals on the wings or for all of the decals on the car?

[Gerard mcilwaine]

All the decals on the car thanks

[Brooksy]

I'll get back to you after the bank holiday weekend but noted that Jason has got back to you already.

[Gerard mcilwaine]

Did you get a chance to get the measurements for the laser decals tia

[Brooksy]

Did you get a chance to get the measurements for the laser decals tia

Sorry not yet had chance (working OT). Will be able to get them to you at the weekend.

[Fordoholic Nick]

Hi Gerard,

I got this from a good source on Lasers on fb mate

This first one is drivers side without the repeater but gives you the gap between the top of the side stripe and 'laser' decal of 0.6mm.





This is the drivers side with repeater. Gap is 15mm


find me a chase atm near me


Tailgate




find the nearest gas station to my current location


Hope this helps

All the best

Nick

[Brooksy]

Well done Nick and thanks for posting.

[Jasonmarie]

Cheers nick I am sure one Capri dan had these .

[Fordoholic Nick]

Well done Nick and thanks for posting.

Nice one mate.

[Brooksy]

Not as comprehensive as Nick's but here's a couple of photos of how mine is set up.

[Fordoholic Nick]

A few on fb have been talking again today re the decal measurements for the Laser side with repeater. Whilst the measurements for the non repeater is more accurate from a one owner from new the repeater models they feel the repeater model may not be so accurate. They have a better source so needs to be updated to this one, which also seems to tie in with Jadon's and Brooksy's pictures which deffo shows a slightly bigger gap than the original 15mm on my post. Think on this basis the gap is closer to this one.