Measurements for decals on laser with side repeaters
-
- Posts: 4
- Joined: Sun Mar 24, 2019 11:43 am
- Car(s): Ford capri laser 1.6
Measurements for decals on laser with side repeaters
Hi guys I'm wondering if anyone has the measurements for decals on laser with side repeaters
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Measurements for decals on laser with side repeaters
Funny as I just got asked that question I will have a quick look and post a picture up . I am sure one Capri Dan has this as well .
Yes here’s the measurements on mine .
Yes here’s the measurements on mine .
Last edited by Jasonmarie on Sun May 26, 2019 4:11 pm, edited 1 time in total.
Ford Capri 2.0 Laser 1987 Mercury Grey .......
- Brooksy
- Donator
- Posts: 337
- Joined: Wed Sep 12, 2018 7:58 pm
- Car(s): 1987 2.0 laser (fair weather car)
Re: Measurements for decals on laser with side repeaters
Hi Gerard
Do you need the measurements for locating just the laser decals on the wings or for all of the decals on the car?
Do you need the measurements for locating just the laser decals on the wings or for all of the decals on the car?
-
- Posts: 4
- Joined: Sun Mar 24, 2019 11:43 am
- Car(s): Ford capri laser 1.6
Re: Measurements for decals on laser with side repeaters
All the decals on the car thanks
- Brooksy
- Donator
- Posts: 337
- Joined: Wed Sep 12, 2018 7:58 pm
- Car(s): 1987 2.0 laser (fair weather car)
Re: Measurements for decals on laser with side repeaters
I'll get back to you after the bank holiday weekend but noted that Jason has got back to you already.
-
- Posts: 4
- Joined: Sun Mar 24, 2019 11:43 am
- Car(s): Ford capri laser 1.6
Re: Measurements for decals on laser with side repeaters
Did you get a chance to get the measurements for the laser decals tia
- Brooksy
- Donator
- Posts: 337
- Joined: Wed Sep 12, 2018 7:58 pm
- Car(s): 1987 2.0 laser (fair weather car)
Re: Measurements for decals on laser with side repeaters
Sorry not yet had chance (working OT). Will be able to get them to you at the weekend.Gerard mcilwaine wrote: ↑Wed May 29, 2019 8:35 pm Did you get a chance to get the measurements for the laser decals tia
- Fordoholic Nick
- Donator
- Posts: 6208
- Joined: Sat Apr 19, 2014 3:40 pm
- Car(s): Ford Capri 2.0 Laser,
Ford Fiesta 1.6 TDCi - Location: Enfield, London
Re: Measurements for decals on laser with side repeaters
Hi Gerard,
I got this from a good source on Lasers on fb mate
This first one is drivers side without the repeater but gives you the gap between the top of the side stripe and 'laser' decal of 0.6mm.
This is the drivers side with repeater. Gap is 15mm
find me a chase atm near me
Tailgate
find the nearest gas station to my current location
Hope this helps
All the best
Nick
I got this from a good source on Lasers on fb mate
This first one is drivers side without the repeater but gives you the gap between the top of the side stripe and 'laser' decal of 0.6mm.
This is the drivers side with repeater. Gap is 15mm
find me a chase atm near me
Tailgate
find the nearest gas station to my current location
Hope this helps
All the best
Nick
I was born a Fordoholic, They'll bury me a Fordoholic...
- Brooksy
- Donator
- Posts: 337
- Joined: Wed Sep 12, 2018 7:58 pm
- Car(s): 1987 2.0 laser (fair weather car)
Re: Measurements for decals on laser with side repeaters
Well done Nick and thanks for posting.
- Jasonmarie
- Donator
- Posts: 4717
- Joined: Thu Aug 13, 2015 12:30 am
- Car(s): Ford Capri 2.0 Laser Mercury Grey 1987 hobby .
Mercedes Vito tourer 2.1 Big Bus Daily Driver - Location: Kent
Re: Measurements for decals on laser with side repeaters
Cheers nick I am sure one Capri dan had these .
Ford Capri 2.0 Laser 1987 Mercury Grey .......
- Fordoholic Nick
- Donator
- Posts: 6208
- Joined: Sat Apr 19, 2014 3:40 pm
- Car(s): Ford Capri 2.0 Laser,
Ford Fiesta 1.6 TDCi - Location: Enfield, London
Re: Measurements for decals on laser with side repeaters
I was born a Fordoholic, They'll bury me a Fordoholic...
- Fordoholic Nick
- Donator
- Posts: 6208
- Joined: Sat Apr 19, 2014 3:40 pm
- Car(s): Ford Capri 2.0 Laser,
Ford Fiesta 1.6 TDCi - Location: Enfield, London
Re: Measurements for decals on laser with side repeaters
A few on fb have been talking again today re the decal measurements for the Laser side with repeater. Whilst the measurements for the non repeater is more accurate from a one owner from new the repeater models they feel the repeater model may not be so accurate. They have a better source so needs to be updated to this one, which also seems to tie in with Jadon's and Brooksy's pictures which deffo shows a slightly bigger gap than the original 15mm on my post. Think on this basis the gap is closer to this one.
I was born a Fordoholic, They'll bury me a Fordoholic...