Page 1 of 1

Rev counter

Posted: Sun Apr 28, 2019 3:19 pm
by Bobpool
I've started to put all the interior back in. Just waiting for the Wife to fit the leather on to the Dashboard before that too goes back in.

I thought I would test the dials after fitting new bulbs and noticed the Rev counter isn't working.I have a spare set of dials so I know it doesn't work on both of them.

Is it an easy fix and what am I looking for ?

Re: Rev counter

Posted: Tue Apr 30, 2019 7:48 am
by Mc Tool
Rev counter needs 12v + , an earth and a signal wire from coil -. A quick check with a tester/multimeter will show which bit is missing , and then it's a case of finding the fault with a continuity meter ( ohms setting on a multi meter will do )
It won't do nuffin if the motor isn't running :tongue:

Re: Rev counter

Posted: Tue Apr 30, 2019 7:21 pm
by Bobpool
I'll make sure the motor is running :lol: