I've started to put all the interior back in. Just waiting for the Wife to fit the leather on to the Dashboard before that too goes back in.
I thought I would test the dials after fitting new bulbs and noticed the Rev counter isn't working.I have a spare set of dials so I know it doesn't work on both of them.
Is it an easy fix and what am I looking for ?
Rev counter
-
- Donator
- Posts: 2362
- Joined: Sat May 17, 2014 8:34 pm
- Car(s): 1980 mk3 capri 2l ohc T9 , Toyota Blade Master 3.5l V6, Paso , 850T,rd400, 900ss
- Location: Invercargill New Zealand
Re: Rev counter
Rev counter needs 12v + , an earth and a signal wire from coil -. A quick check with a tester/multimeter will show which bit is missing , and then it's a case of finding the fault with a continuity meter ( ohms setting on a multi meter will do )
It won't do nuffin if the motor isn't running
It won't do nuffin if the motor isn't running
Sometimes I talk to myself ... and we both have a good laugh
- Bobpool
- Donator
- Posts: 66
- Joined: Mon Mar 18, 2019 6:08 pm
- Car(s): Ford Capri 1986 2.0 Laser
Ford Probe 2.5 V6 - Location: Liverpool
Re: Rev counter
I'll make sure the motor is running