1.6 Gearbox

Please restrict your questions and replies to Capri related technical issues!
Post Reply
Posts: 130
Joined: Wed Sep 02, 2015 7:57 am
Car(s): Ford Capri 2.0s Restoration project

1.6 Gearbox

Post by Rosco59 » Mon Feb 25, 2019 8:07 pm

Hi would a 1.6 type e gearbox fit a 2.0 pinto engine. Thanks

Mc Tool
Posts: 596
Joined: Sat May 17, 2014 8:34 pm
Car(s): 1980 mk3 capri 2l ohc T9 , Toyota Blade Master 3.5l V6, Paso , 850T,rd400, 900ss
Location: Invercargill New Zealand

Re: 1.6 Gearbox

Post by Mc Tool » Mon Feb 25, 2019 10:15 pm

Yeah , if you also have the correct bell housing , either integral or seperate depending on which version of "e" box you have ,there is a and b versions one has an integral bell housing, and the other is separate, and you would need to get the clutch plate with the correct splines for the "e" input shaft, and the correct mount (or the ability to modify one to fit ) . If you are thinking of changing the box go for a type 9 as the extra gear is good for cruising and economy , 1st gear is a bit low but you can get a kit from Burton's to sort this :drive:
I have the patience of a saint ........Saint cnuty Mc Fuckoff

Post Reply