Brake calliper to strut bolts???

Please restrict your questions and replies to Capri related technical issues!
Post Reply
User avatar
NaisiaN
Posts: 142
Joined: Fri May 13, 2016 12:41 pm
Car(s): 1.6 laser 1986. (Toy)
1.4 Renault 19 TR 1989. (Daily)
Contact:

Brake calliper to strut bolts???

Post by NaisiaN »

Hi all,

Half way through replacing the discs and the 2x bolts that hold the calliper to the strut have sheered off. Does anyone know the size/length of these bolts?? And is there anywhere I can get them from , diy store etc?

Thanks!
Jordan
Paul G
Posts: 1857
Joined: Fri Jul 03, 2015 5:21 pm
Car(s): MK 3 3.0S needing restoration, 2.0S, 1.6 Laser (nearly ready), Skoda Octavia VRS, VW Polo 1.4CL
Location: High Wycombe

Re: Brake calliper to strut bolts???

Post by Paul G »

NaisiaN wrote:Hi all,

Half way through replacing the discs and the 2x bolts that hold the calliper to the strut have sheered off. Does anyone know the size/length of these bolts?? And is there anywhere I can get them from , diy store etc?

Thanks!
Hi Jordan

You could get a used set from Caprigear Martin or i think Tickover or CCi do new ones. Don't just fit random bolts as these caliper bolts will be stronger than ordinary bolts and made of high tensile steel.

Be very careful getting the remains of the old bolts out of the strut as you do not want to damage the thread in the strut. If you do this is one area where you can't really re - thread it due to safety concerns.
User avatar
Andrew 2.8i
Donator
Donator
Posts: 14723
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion
Contact:

Re: Brake calliper to strut bolts???

Post by Andrew 2.8i »

Image
User avatar
Andrew 2.8i
Donator
Donator
Posts: 14723
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion
Contact:

Re: Brake calliper to strut bolts???

Post by Andrew 2.8i »

https://www.ebay.co.uk/itm/Ford-M16-Cal ... 3260844757
As Paul says, I think that the bolts might need to be high tensile 10.9, so it's best to check before buying.

Andrew.
Image
User avatar
NaisiaN
Posts: 142
Joined: Fri May 13, 2016 12:41 pm
Car(s): 1.6 laser 1986. (Toy)
1.4 Renault 19 TR 1989. (Daily)
Contact:

Re: Brake calliper to strut bolts???

Post by NaisiaN »

Brill thanks!
I saw the ones on burtonpower but misread it, thought they were for 2.8 and 3.0 only. Will get some ordered!

Trying to get these out is a pain arse, and dust shield won’t come off either to be able to drill from front. Why is a simple job never easy. I Fkin hate rust!!!
Jordan
Paul G
Posts: 1857
Joined: Fri Jul 03, 2015 5:21 pm
Car(s): MK 3 3.0S needing restoration, 2.0S, 1.6 Laser (nearly ready), Skoda Octavia VRS, VW Polo 1.4CL
Location: High Wycombe

Re: Brake calliper to strut bolts???

Post by Paul G »

Get a blowtorch and heat the bolts.
Post Reply