Hi, does anyone have any idea if you can get hold of the inlet (hose tail) at the top end of the coolant by-pass hose anywhere? Mine is fecked.... pic for info
2.8 Cologne coolant bypass
-
- Posts: 2149
- Joined: Tue Jul 29, 2008 6:40 pm
- Car(s): 1984 B Reg 2.8i rebored to 2922cc near concours condition. Restored from near scrap condition.
1983 A Reg 2.8i Caspian Blue over Silver. Ongoing now roadworthy project from scrap condition - Location: England
Re: 2.8 Cologne coolant bypass
I’m sure Capri gear or Tickford man on here would have one of those.
Olly W
Olly W
-
- Posts: 195
- Joined: Sun May 11, 2014 6:43 am
- Car(s): I have got a 1981 3000s and I have just got my self
A 1987 2.8i thay are both red
I had my first capri when I was 17" it was a 3000GTXLR
I have had a lot of fast fords vans all ways put bigger engine in
I also have had motor bikes I have a 1200 Suzuki bandit - Contact:
Re: 2.8 Cologne coolant bypass
Ship I have some that I have taken from some old
Manifolds but most plumbers murchents will sell
Send me the size and I’ll have a look which ford is it
From and wot cc mark
Manifolds but most plumbers murchents will sell
Send me the size and I’ll have a look which ford is it
From and wot cc mark
Re: 2.8 Cologne coolant bypass
Engine is 2.8 carb unit from mk2 granada ( si I was told)Bod9084 wrote:Ship I have some that I have taken from some old
Manifolds but most plumbers murchents will sell
Send me the size and I’ll have a look which ford is it
From and wot cc mark
Think thread is m22 and took a 24mm socket to remove