2.8 Cologne coolant bypass

Please restrict your questions and replies to Capri related technical issues!
Post Reply
johno32
Posts: 2
Joined: Sat Jun 23, 2018 7:10 pm
Car(s): Mk3 cortina (2.8) mk2 escort (project)

2.8 Cologne coolant bypass

Post by johno32 »

Hi, does anyone have any idea if you can get hold of the inlet (hose tail) at the top end of the coolant by-pass hose anywhere? Mine is fecked.... pic for info
Image
ollyw
Posts: 2148
Joined: Tue Jul 29, 2008 6:40 pm
Car(s): 1984 B Reg 2.8i rebored to 2922cc near concours condition. Restored from near scrap condition.
1983 A Reg 2.8i Caspian Blue over Silver. Ongoing now roadworthy project from scrap condition
Location: England

Re: 2.8 Cologne coolant bypass

Post by ollyw »

I’m sure Capri gear or Tickford man on here would have one of those.


Olly W
Bod9084
Posts: 195
Joined: Sun May 11, 2014 6:43 am
Car(s): I have got a 1981 3000s and I have just got my self
A 1987 2.8i thay are both red
I had my first capri when I was 17" it was a 3000GTXLR
I have had a lot of fast fords vans all ways put bigger engine in
I also have had motor bikes I have a 1200 Suzuki bandit
Contact:

Re: 2.8 Cologne coolant bypass

Post by Bod9084 »

Ship I have some that I have taken from some old
Manifolds but most plumbers murchents will sell
Send me the size and I’ll have a look which ford is it
From and wot cc mark
johno32
Posts: 2
Joined: Sat Jun 23, 2018 7:10 pm
Car(s): Mk3 cortina (2.8) mk2 escort (project)

Re: 2.8 Cologne coolant bypass

Post by johno32 »

Bod9084 wrote:Ship I have some that I have taken from some old
Manifolds but most plumbers murchents will sell
Send me the size and I’ll have a look which ford is it
From and wot cc mark
Engine is 2.8 carb unit from mk2 granada ( si I was told)
Think thread is m22 and took a 24mm socket to remove
Post Reply