Mk3 headlamps

Please restrict your questions and replies to Capri related technical issues!
Rosco59
Posts: 83
Joined: Wed Sep 02, 2015 7:57 am
Car(s): Ford Capri 2.0s Restoration project

Mk3 headlamps

Postby Rosco59 » Tue Dec 05, 2017 8:33 pm

Hi I’ve got mk3 Capri lights fitted in a mk3 cortina. The problem is the side lights and dipped beam work fine but when on full beam the inner light goes on as it should but cancels out the outer dipped beam and the side light goes on. I’ve tried a Capri relay but it never worked.

User avatar
Andrew 2.8i
Donator
Donator
Posts: 10017
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion

Re: Mk3 headlamps

Postby Andrew 2.8i » Tue Dec 05, 2017 8:48 pm

Hi,
The Cortina relay has wiring that is different than the Capri item. As you say, it switches off the dipped beam when main beam is switched on.
Swapping over to a Capri relay should fix the problem.
Was the Capri relay you tried known to be working? And were all 4 fuses in it OK?

Andrew.
Image

Rosco59
Posts: 83
Joined: Wed Sep 02, 2015 7:57 am
Car(s): Ford Capri 2.0s Restoration project

Re: Mk3 headlamps

Postby Rosco59 » Tue Dec 05, 2017 9:43 pm

Hi thanks I did try the relay before i swaped it over and it was working on the Capri. Forgot to say that The cortina had single lights before I changed them.would the light stalk connections be different on a cortina.

User avatar
Andrew 2.8i
Donator
Donator
Posts: 10017
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion

Re: Mk3 headlamps

Postby Andrew 2.8i » Wed Dec 06, 2017 5:45 am

Rosco59 wrote:Forgot to say that The cortina had single lights before I changed them.would the light stalk connections be different on a cortina.

Hi,
On single units, it's usually normal for the dipped lights to go out when the mains come on.
I would check for voltage on the dipped beam live feed into the relay. If you lose that voltage when the mains are switched on, then the wiring needs to be altered to maintain a constant live. It could also be the stalk, as you say.

Andrew.
Image

Caprigear
Donator
Donator
Posts: 2068
Joined: Thu Jan 27, 2011 9:14 pm

Re: Mk3 headlamps

Postby Caprigear » Wed Dec 06, 2017 4:54 pm

Later MK2 and MK3 stalks are the same. It could be the relay on the bulkhead, MK2 ones were different.
Image

Rosco59
Posts: 83
Joined: Wed Sep 02, 2015 7:57 am
Car(s): Ford Capri 2.0s Restoration project

Re: Mk3 headlamps

Postby Rosco59 » Thu Dec 07, 2017 7:45 pm

Hi thanks for the reply’s how do I going about changing the wiring as full beam definitely cancels out the dipped on the outer light.

Caprigear
Donator
Donator
Posts: 2068
Joined: Thu Jan 27, 2011 9:14 pm

Re: Mk3 headlamps

Postby Caprigear » Thu Dec 07, 2017 9:07 pm

You would probably need both wiring diagrams from the capri and Cortina.
Image


Return to “Q & A”

Who is online

Users browsing this forum: No registered users and 18 guests