Rear spring
-
- Donator
- Posts: 216
- Joined: Thu Jun 07, 2012 9:50 pm
- Car(s): D reg 280 , various others
- Location: Airdrie
Rear spring
Hi folks ,iam starting a bit of a resto on my 280 my question is,I have new springs to go on rear do I need the flat rubber pads that go in the centre of the Spring,I was going to get a set and it was suggested that you don't need them on single leafs thanks ,
-
- Donator
- Posts: 635
- Joined: Fri Dec 09, 2016 9:07 am
- Car(s): Four 3 litre Capri's and 2 Mark 1 GXL's
Re: Rear spring
Hi mate,
You have been informed correctly, the rubber pads are not needed on the single leaf springs, the axle securing brackets sit directly on the spring's
Wayne
You have been informed correctly, the rubber pads are not needed on the single leaf springs, the axle securing brackets sit directly on the spring's
Wayne
If an honest man is wrong and after demonstrating that he is wrong he either stops being wrong or stops being honest
-
- Donator
- Posts: 216
- Joined: Thu Jun 07, 2012 9:50 pm
- Car(s): D reg 280 , various others
- Location: Airdrie
Re: Rear spring
Thanks Wayne , much appreciated,