Page 1 of 1

starter motor

Posted: Tue Sep 26, 2017 4:41 pm
by MiddleJoe77
Starter motor didn't want to turn over, think it was a jammy solenoid, so I bought a new one. Problem is, this new one bolts on so that the solenoid is below the motor, and I'm not sure if its meshing properly and don't want to try it incase is eats the flywheel. Is there any way of knowing if its correct or not?

Re: starter motor

Posted: Tue Sep 26, 2017 5:24 pm
by 340truck
Sounds like you may have an automatic one. Not a problem, should still work fine

Re: starter motor

Posted: Mon Oct 09, 2017 2:20 pm
by -JC-
Can confirm that. I ran with the old automatic one after changing to a manual gearbox.