2.9 12V Conversion Help

Please restrict your questions and replies to Capri related technical issues!
Post Reply
pauliesheer
Posts: 1
Joined: Thu Jun 08, 2017 8:25 pm
Car(s): Projects

2.9 12V Conversion Help

Post by pauliesheer »

Hi folks,

Currently doing a conversion using a 12V 2.9 from a Sierra XR4x4 (with Air Flow Meters) along with its ECU and wiring loom.

I've been told its harder to do the conversion using Sierra wiring rather than Granada - but not all that difficult. Can anyone offer advice on what wires need splicing into the original car loom? I'm assuming this would be the same as a Pinto EFI conversion using a Sierra as the donor so experience on that conversion might help me out too

Thanks in advance

Paul
-JC-
Posts: 4412
Joined: Mon Jul 28, 2008 1:17 pm
Car(s): 1986 Ford Capri 2.0 Laser
2004 Mazda RX8
Location: Surrey
Contact:

Re: 2.9 12V Conversion Help

Post by -JC- »

Have you seen this thread already? viewtopic.php?t=39432 one of the people posting in that thread might be able to help
Image
"Hard work often pays off after time, but laziness always pays off now."
Post Reply