Parts suppliers

Please restrict your questions and replies to Capri related technical issues!
Post Reply
User avatar
Peter-S
Donator
Donator
Posts: 7453
Joined: Mon Jul 28, 2008 7:57 am
Car(s): 1985 Capri 2.0
1983 Capri 2.8i
Location: Kent
Contact:

Parts suppliers

Post by Peter-S »

Posted on behalf of new member 'Slappy'


Dear members

I have recently joined the Forum in search of help/advice.

I have a 280 which I try & maintain myself as best I can! My car has been recently coughing/spluttering when upto temperature & struggles when I accelerate hard. A friend who used to own an XR4i(Which had the same engine)has suggested it is fuel injectors that need replacing, amongst other things. I would be grateful if anyone could forward me any links to web-sites that sell genuine Ford parts for 80's Capris.

Thanks

Matt
ImageBanner by Peter Smith, on Flickr
User avatar
Peter-S
Donator
Donator
Posts: 7453
Joined: Mon Jul 28, 2008 7:57 am
Car(s): 1985 Capri 2.0
1983 Capri 2.8i
Location: Kent
Contact:

Re: Parts suppliers

Post by Peter-S »

Before worrying about the injectors make sure the basics are OK - timing, plugs, leads, new fuel filter and air filter. Also check under the large banjo connector on top of the Warm up regulator as the filter there can become clogged and cause your sort of problem.

On the original parts front you will struggle these days for genuine stuff but with regards the injectors Bosch still make them and there are a few sellers on ebay that stock them. They start at around £35 each though so you want to make sure you've checked other things before shelling out.
ImageBanner by Peter Smith, on Flickr
mjcapri
Donator
Donator
Posts: 1893
Joined: Tue Jul 29, 2008 5:23 pm
Car(s): Diamond White Granada 24v

Caspian Blue Sierra XR4i

Stealth Grey Focus RS

Storm Grey Fiesta ST200 (actually belongs to the missus!)

Mean Green Fiesta ST-3

Re: Parts suppliers

Post by mjcapri »

I'd definitely have a look at the warm up regulator as Peter has suggested.
User avatar
Andrew 2.8i
Donator
Donator
Posts: 14723
Joined: Sat Jan 25, 2014 7:38 pm
Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new)
Location: Ceredigion
Contact:

Re: Parts suppliers

Post by Andrew 2.8i »

Hi,
If you're sure that the spluttering is fuel system related, have a look through this troubleshooting guide:
http://www.zeepoort.nl/jetronic/K-Jetro ... oting.html

Andrew.
Image
Post Reply