Dashboard brake servo
Dashboard brake servo
Hi Ive just bought a mint dashboard in grey. Where are they screws bolts to remove the dash and at the same point I want to remove the brake servo and paint it . Are they bolts located behind the dash
Re: Dashboard brake servo
Yes.03kkeane wrote: Are they bolts located behind the dash
- Andrew 2.8i
- Donator
- Posts: 14782
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Dashboard brake servo
Hi,03kkeane wrote:Where are they screws bolts to remove the dash
First you'll have to remove the lower dash panels, the fascia, instrument binnacle and the glovebox. There's detailed instructions describing how to do this in the Haynes manual. After you've removed all of that, from memory, there are 6 or 7 bolts that hold the dash in place. Most are obvious, but there is one under the windscreen/A-pillar trim, and one under the radio.
It's not a difficult task and you should easily have the dash replaced in a day.
Andrew.