Tell me if I am stil missing something from description.
Sorry for Bad english, I hope all understand what I wrote before.
Forgot to tell, if someone wonders where all those strange looking links lead to.
They lead to Microsoft Onedrive, blame Microsoft for making strange looking image gallery links.
Questions for readers.
https://1drv.ms/f/s!Ak0ev910-aPVuB6lMaevMJy149Fa
Where I can buy suitable wiper arm covers, like I am missing in the picture?
Should I go for
Alloy
http://www.burtonpower.com/alloy-camsha ... 1423s.html
or steel one in my new engine?
http://www.burtonpower.com/cam-gear-all ... v1419.html
I am thinking setting Rev limiter to 6600 to 6800 depending on engine
max power output.
What kind of valve stem seals are best in my case?
Normal umbrella type valve steam seals won't fit inside double valve springs and smaller type valve steam seals, are too tight.
I think valves will get zero lubrication if I use them. Would it be good idea to take off stem retainer spring off to give some lubrication?
http://www.rockauto.com/en/moreinfo.php ... 32&jsn=639 (from this stems seals)
E85 fuel is pretty dry also, compared to 98E5 fuel and also turbo engine... lots of heat and pressure
compared to natural aspirated engine.
Heritage " Ford Capri Mk1 Facelift 3000GT Resto/Mod
- Andrew 2.8i
- Donator
- Posts: 14773
- Joined: Sat Jan 25, 2014 7:38 pm
- Car(s): '83 2.8 Injection (sunny days only)
'04 Toyota MR2 (owned from new) - Location: Ceredigion
- Contact:
Re: Heritage " Ford Capri Mk1 Facelift 3000GT Resto/Mod
[quote="Vermilion"]Where I can buy suitable wiper arm covers, like I am missing in the picture?[quote]
Hi,
Try Martin at Caprigear, he might have what you need.
Telephone UK +44 (0)1507 343148 (workshop). Note that the workshop is closed until 23rd March.
Andrew.
Hi,
Try Martin at Caprigear, he might have what you need.
Telephone UK +44 (0)1507 343148 (workshop). Note that the workshop is closed until 23rd March.
Andrew.