Hi
Can anyone tell me what the spade connectors on the side of the fuse box connect to?
Thanks
fuse box 2.8i
- mwillerton
- Donator
- Posts: 128
- Joined: Sat Mar 09, 2013 12:49 pm
- Car(s): Ford Capri 2.8i special - Diamond White
Honda Civic 2.2d.
Yamaha Fazer 600 - Location: Kent
- mwillerton
- Donator
- Posts: 128
- Joined: Sat Mar 09, 2013 12:49 pm
- Car(s): Ford Capri 2.8i special - Diamond White
Honda Civic 2.2d.
Yamaha Fazer 600 - Location: Kent
- mwillerton
- Donator
- Posts: 128
- Joined: Sat Mar 09, 2013 12:49 pm
- Car(s): Ford Capri 2.8i special - Diamond White
Honda Civic 2.2d.
Yamaha Fazer 600 - Location: Kent
Re: fuse box 2.8i
anybody?
- mwillerton
- Donator
- Posts: 128
- Joined: Sat Mar 09, 2013 12:49 pm
- Car(s): Ford Capri 2.8i special - Diamond White
Honda Civic 2.2d.
Yamaha Fazer 600 - Location: Kent
Re: fuse box 2.8i
Thanks Neil, i have seen this. It still doesn't tell me what goes on the spade connectors?
Re: fuse box 2.8i
Are you referring to the spare spade connectors? I think there are 2 that don't connect to anything. They are there for any auxiliary devices that are fitted. One of mine is connected to my electric fan.mwillerton wrote:Thanks Neil, i have seen this. It still doesn't tell me what goes on the spade connectors?
-
- Posts: 457
- Joined: Tue Nov 30, 2010 3:51 am
- Car(s): 2.8EFI Turbo special with LPG
- Location: Sussex
Re: fuse box 2.8i
The single one I believe goes to the wiper washer pump usually goes on fuse 1
4 pin plug
Power when side light stalk active - Fuse 3 Grey-Red wires -- right hand tail lamp & under bonnet to side lamp
Power when side light stalk active - Fuse 4 Grey-Black wires -- left hand tail lamp & under bonnet to side lamp
Ign 2 circuit - Fuse 5 blank
Ign 2 circuit - Fuse 6 Black-Blue wire to reverse light switch on gearbox
- mwillerton
- Donator
- Posts: 128
- Joined: Sat Mar 09, 2013 12:49 pm
- Car(s): Ford Capri 2.8i special - Diamond White
Honda Civic 2.2d.
Yamaha Fazer 600 - Location: Kent
Re: fuse box 2.8i
I have 4 connected to mine and 2 spare. Trying to work out what they do
And if I can use the 2 spare one's?
Thank you
And if I can use the 2 spare one's?
Thank you
-
- Posts: 457
- Joined: Tue Nov 30, 2010 3:51 am
- Car(s): 2.8EFI Turbo special with LPG
- Location: Sussex
Re: fuse box 2.8i
Fuse 7 ignition switch position 2
Fuse 2 will only work when the lights are on.
Fuse 1 is a 12V continuous power supply a direct 12v battery supply.
Fuse 2 will only work when the lights are on.
Fuse 1 is a 12V continuous power supply a direct 12v battery supply.