window winding mech
-
- Posts: 418
- Joined: Tue Nov 20, 2012 9:02 am
- Car(s): Ford capri mk3 1,6 laser. Daily driver ( LPG converted )
- Location: Northampton
window winding mech
Ok so my drivers door window wont go up or down so I stripped the door and found the teeth are missing on the quadrant on the door. Anybody had any luck replacing these? Cheers
-
- Donator
- Posts: 2373
- Joined: Sat May 17, 2014 8:34 pm
- Car(s): 1980 mk3 capri 2l ohc T9 , Toyota Blade Master 3.5l V6, Paso , 850T,rd400, 900ss
- Location: Invercargill New Zealand
Re: window winding mech
Build em up with a mig and file to shape
Sometimes I talk to myself ... and we both have a good laugh
Re: window winding mech
Caprigear could probably post you out a new asembly
Re: window winding mech
Yes I could.
-
- Posts: 677
- Joined: Sun Aug 14, 2011 10:52 pm
- Car(s): Black Capri 2.0S
- Location: Wirral/Liverpool
Re: window winding mech
A man of few, but very reassuring words.
-
- Posts: 418
- Joined: Tue Nov 20, 2012 9:02 am
- Car(s): Ford capri mk3 1,6 laser. Daily driver ( LPG converted )
- Location: Northampton
Re: window winding mech
I have a spare door. Its the actual replacment im more interested in. It all looks riveted in to me.
Re: window winding mech
One part is fitted with 4 screws, so dead easy to remove.
The other part is held in with 3 pop-rivets. These can be drilled out and easily replaced with a hand rivetter.
The other part is held in with 3 pop-rivets. These can be drilled out and easily replaced with a hand rivetter.