Van wheel help

You can RANT and RAVE to your hearts content here instead of clogging up the Q&A Technical Forum!
Report any offensive posts to [email protected]
Post Reply
Lord Flasheart
Posts: 356
Joined: Mon Feb 20, 2017 6:19 pm
Car(s): 3.0 Ghia

Van wheel help

Post by Lord Flasheart »

Not Capri related but .........

Sold some steel wheels for my uncle had been given years ago on the bay a few weeks back, thought they were off a Renault traffic or Vauxhall van.

Very nice buyer been in touch & said they don't fit his Renault Traffic as the wheel hubs are too big for the wheels, to help him sell them on I'm trying to find what there will fit, these are all the part markings as stamped on the wheels & PCD sizes etc.

6J16H2D ET66 KPZ 60613 DOT E KBA 44544 OEL 4N RE616003 23 10 08

5 stud 129 PCD
90mm centre hole
76mm between neighbouring studs

Any clues folks ?
Paul G
Posts: 1862
Joined: Fri Jul 03, 2015 5:21 pm
Car(s): MK 3 3.0S needing restoration, 2.0S, 1.6 Laser (nearly ready), Skoda Octavia VRS, VW Polo 1.4CL
Location: High Wycombe

Re: Van wheel help

Post by Paul G »

They are probably Vauxhall Movano/Renault Master wheels.

Found this ebay link and the part number is the same as in the long list of numbers you quoted - RE 616003.

http://www.ebay.co.uk/itm/16-Renault-Ma ... 2548.l4275

Did they look like this? Offset, PCD 130 instead of 129 - may be measuring error, width and diameter also same as yours.

Hope this helps
Lord Flasheart
Posts: 356
Joined: Mon Feb 20, 2017 6:19 pm
Car(s): 3.0 Ghia

Re: Van wheel help

Post by Lord Flasheart »

Many thanks Paul, have sent this info on to the buyer, the good thing is the seller in the link is in Kent which is where my buyer is from too so maybe he can pick their brains for further info.

Thanks again mate :)
Post Reply