do you know the diameter of the trigger wheel? just so i can start mocking up a vr sensor bracket. im guessing around 140mm?
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
Colin
-
- Donator
- Posts: 5474
- Joined: Mon Jul 28, 2008 4:13 pm
- Car(s): Supercharged 2.1 (daily driver- when it works)
-
- Donator
- Posts: 5474
- Joined: Mon Jul 28, 2008 4:13 pm
- Car(s): Supercharged 2.1 (daily driver- when it works)
thanks very much
its looks like the bracket i just made up will work a treat! just gota me pulley now!
i made it from a single piece of ally right angle, 5mm thick, and about 50mmx50mm, about 4.5" long ish...
all i need to do now is get the distance from the block set up andthe distance from the tooth to sensor. but thatl have to wait till i get me wheel.
thanks for the help!
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
i made it from a single piece of ally right angle, 5mm thick, and about 50mmx50mm, about 4.5" long ish...
all i need to do now is get the distance from the block set up andthe distance from the tooth to sensor. but thatl have to wait till i get me wheel.
thanks for the help!
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
-
- Donator
- Posts: 5474
- Joined: Mon Jul 28, 2008 4:13 pm
- Car(s): Supercharged 2.1 (daily driver- when it works)
where can i find a suitable switch for 2 maps option?
cant seem to find what i think i need? any suggestions? do you happen to know the correct name for the switch i need, ie dpdt etc?
thanks
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
thanks
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
Re: where can i find a suitable switch for 2 maps option?
single pole double throw (SPDT) or a double (DPDT) but you only use one pole.
Maplins or ebay...
There are a few options for enabling the 5V reference in the controller... see the autosport labs website for the options.
I chose to build the Vref part of the TPS circuitry on mine, but this is unnecessary as there is a simple 1 component way of doing it... all listed on autosport labs.
A Capri is for life... NOT just for Christmas
Maplins or ebay...
There are a few options for enabling the 5V reference in the controller... see the autosport labs website for the options.
I chose to build the Vref part of the TPS circuitry on mine, but this is unnecessary as there is a simple 1 component way of doing it... all listed on autosport labs.
A Capri is for life... NOT just for Christmas
-
- Donator
- Posts: 5474
- Joined: Mon Jul 28, 2008 4:13 pm
- Car(s): Supercharged 2.1 (daily driver- when it works)
thanks, got one on its way.
ta
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.