Glyn the gearbox guru.....
-
- Donator
- Posts: 3450
- Joined: Mon Jul 28, 2008 8:00 am
- Car(s): Rat - GONE
2.8 - GONE
Volvo - GONE
Only 2 Zetec SE Fezzas left now, 1.6 ghia gone. Mk 1 Focus replaces, sticking with 1.6 Zetec SE - Location: Hatfield Peverel Essex
Glyn the gearbox guru.....
...or anyone else, ebay item 150146534941, what's the catch? Nobody bidding on it? Why not?
-
- Posts: 11723
- Joined: Fri Aug 01, 2008 10:41 pm
- Car(s): Pinto/crossflow guru.
Single rail type 3........
pinto bell housing as the starter is on the other side for a crossflow.
looks standard to me appart from having them holes drilled, the idea is not to lighten it as he said but to let heat out the clutch housing.
same box as mk3 capri 1.6, mk4/5 cortina 1.6, and the very last lotus cortinas had em too.
you can tell its single rail as the single bump on the end of the alloy lid, the 3 rail has three bumps.
20 spline input on that.
looks standard to me appart from having them holes drilled, the idea is not to lighten it as he said but to let heat out the clutch housing.
same box as mk3 capri 1.6, mk4/5 cortina 1.6, and the very last lotus cortinas had em too.
you can tell its single rail as the single bump on the end of the alloy lid, the 3 rail has three bumps.
20 spline input on that.
-
- Posts: 11723
- Joined: Fri Aug 01, 2008 10:41 pm
- Car(s): Pinto/crossflow guru.
-
- Donator
- Posts: 3450
- Joined: Mon Jul 28, 2008 8:00 am
- Car(s): Rat - GONE
2.8 - GONE
Volvo - GONE
Only 2 Zetec SE Fezzas left now, 1.6 ghia gone. Mk 1 Focus replaces, sticking with 1.6 Zetec SE - Location: Hatfield Peverel Essex
So the same....
...as in my capri then. Suitable replacement, I might bid on it. And this is not really a technical Q (imho)
Re: Single rail type 3........
YAY glyn's back...i however know very littl about annything so YA GLYN