Rob was kind enough to give me a double water pump pulley, so now i want them all!
And talking of pulleys and stuff, anyone have a 2.8 crossmember going spare? I think im going to PAS my car to make it more town and Mrs friendly. Ive got the pump and bracket (cheers again Rob), so now need the x member and rack.
Rich"bar weep granna weep ni ni bong!"
Where can i get a double crank and alternator pulley?
-
Supercharged Nat
- Donator
- Posts: 5474
- Joined: Mon Jul 28, 2008 4:13 pm
- Car(s): Supercharged 2.1 (daily driver- when it works)
yep any pinto sierra with pas
or 2.8i capris/ granada/ sierras have double v pulleys (well most of them i think)
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
"Understeer" is when you hit the fence with the front of the car.
"Oversteer" is when you hit the fence with the rear of the car.
"Horsepower" is how fast you hit the fence.
"Torque" is how far you take the fence with you.
-
Matty28i
- Posts: 2448
- Joined: Mon Jul 28, 2008 6:26 pm
- Car(s): Mk3 2.8i not a 2.8i any more... 2.9 24V BOB Long Term Project.
Mk3 1.6LS Now 2.0lt powered 4 speed rocket box. Work in progress daily driver.
Rich find a Sierra 2.0lt or similar...
Then nick all the power stearing parts off it.
As for engine mounts, they just need modifcation to suit the offset of the crossmember.
Matty28i
As for engine mounts, they just need modifcation to suit the offset of the crossmember.
Matty28i
-
Peter-S
- Donator
- Posts: 7455
- Joined: Mon Jul 28, 2008 7:57 am
- Car(s): 1985 Capri 2.0
1983 Capri 2.8i - Location: Kent
- Contact:
Tis a pity ...
you didn't post that question before the weekend Rich as I have a double pulley in my garage that I could have brought up to dicc. Let me know if you have trouble finding one and I can post it but it is a bit heavy
