The Ford Capri Laser Page

Hi mate,

How much would you need to part with the top set of brackets.

Cheers Allan.

Hi Steve,
Had mine replaced late last year by auto windscreen through insurance. They did bring the wrong one first as it had a patch on it for the mirror to stick on. One week later got the correct one brown tint for a laser only cost £75xs hope that this helps.
Cheers Allan

I replaced the rear ones last year with orange super flex ones and noticed a massive difference. So will probably change front ones as well. Don't know if they are worn as car has only done 53k but surely they must be starting to perish after all these years. Are they difficult to do.
Cheers Allan.

Thinking of polybushes for Capri, Does anyone know why they are different colours,is this for different ride stability, if so what is the best ones.
Thanks Allan

Check mine and the front panel does have the dimples in. Does anyone know where I could get a image of the brackets from so that I can fabricate a pair.
Cheers

Thanks for that will purchase some aftermarket ones as genuine ford ones are going for silly money.

Thanks for the replies, the wirering that I refer to is the two plugs behind the front panel they the same connection as those that you come with the genuine ford lamps.will need to check if there is a live feed to them.
Cheers Allan

Does anyone know that if I was to fit front spots using the excisting two spare plugs on my laser would I still need to fit a relay or is it just plug and play.Also could you tell me what the correct distance apart they should be if I was to fit round ones above the bumper.
Thanks in advance
Allan.

Thanks for the replies,will probably try wakenson as this appears to be the easier application, will let you know when I get it sorted.

Thanks again.

Hi all,

Does anybody know what colour die is needed for a laser steering wheel and where I could get it as mine is looking a bit grubby and thought with the car being off the road it would be a good time to do those little jobs.

Cheers Allan.

Have you checked the rear leaf spring shackle bushes for wear, if the ride height is ok it be those or they could be loose.good luck.

Suspect that this has been asked before, Does anyone know what the correct size is for the front spot lamps on a mk3 .
Cheers Allan.

Car coming off the road at the end of the month for the winter so this could be a good time to do those little jobs.

Electric aerial won't go up or down, I can hear the motor running both ways but nothing happens. Is there any way to repair it as it is original.

Cheers Allan.

Will need to buy another condenser as the other one was shot as it would not start at all. Can't understand how it cuts out but starts straight back up at turn of the key.

Cheers
Allan

Still having problems when hot, thinking about going back to basics and double checking everything.
Thanks
Allan

Running on points and condenser, both were changed about 500 miles ago along with plugs,cap and rotor arm.dont now why but when it cuts out sometimes the brake warning light also comes on.
Got my head done in.

Cheers.

Starting to cut out when hot. After the engine is hot when I slow down and come to a stop the idle drops and then cuts out.starts straight back up can drive for a hundred yards stop and then cuts out again.it will keep doing this until it cools of.i have not adjusted anything. Help would be greatly ...

Hi got mine refurbished for £195.00 including new bushes,took about a week.place was called owen springs.

Hi all,

I am having my front screen replaced due to it being cracked. Just wondering does anybody know where I could get the reg scribed again as all the rest of the glass is original. Spoke to the supplier who no longer do this.

Thanks